Comments on: XBOX 360 Repair https://jestineyong.com/xbox-360-repair/ Semiconductors, Test Equipments, Circuit Board Troubleshooting, Electronic Repair Courses and Many More! Mon, 09 Aug 2010 22:33:12 +0000 hourly 1 https://wordpress.org/?v=5.4.19 By: admin https://jestineyong.com/xbox-360-repair/comment-page-1/#comment-6413 Mon, 09 Aug 2010 22:33:12 +0000 https://www.jestineyong.com/?p=309#comment-6413 Hi Robbe,

Thanks for sharing!

Jestine

Likes(0)Dislikes(0)
]]> By: Robbe https://jestineyong.com/xbox-360-repair/comment-page-1/#comment-6408 Mon, 09 Aug 2010 15:41:31 +0000 https://www.jestineyong.com/?p=309#comment-6408 there are many guides and forums about this topic
my advice
compare several guides, ebooks with each other 4 the best road to succes
they differ in little things depending on who wrote the guide (pro/amateur)

the method i use is where the mobo and steel case is "clamp fixed" together this gives best heat dissipation

repaired several xbox this way with succes others failed again after short time

advice i give after repair 2 owner
keep xbox wel ventilated and free standing (not in cupboard or so)
power down xbox every hour for 10 - 15 min like xbox manual advices

i googled all the info i needed there is plenty info on the web

grt
Robbe

Likes(0)Dislikes(0)
]]> By: admin https://jestineyong.com/xbox-360-repair/comment-page-1/#comment-4289 Fri, 01 Jan 2010 13:40:41 +0000 https://www.jestineyong.com/?p=309#comment-4289 Hi Jon,

Thanks for the tip!

Jestine

Likes(0)Dislikes(0)
]]> By: Jon https://jestineyong.com/xbox-360-repair/comment-page-1/#comment-4284 Fri, 01 Jan 2010 08:21:31 +0000 https://www.jestineyong.com/?p=309#comment-4284 You need to get the secondary code by turning on then by pressing the sync button down and hold it down. Now that you have the sync button pressed you will need to press the eject button four times to give you the secondary code. Pay attention to the lights. Four flashes is zero. Repeat the step again to confirm code (four digits or flashes long). Most likely it can be repaired with a clamp fix. Its an attempt to draw the warped motherboard back to the processor and/or gpu. Good stuff.

Jestine. thank you for all you do for the community in repair. God Bless

Jon

Likes(0)Dislikes(0)
]]> By: admin https://jestineyong.com/xbox-360-repair/comment-page-1/#comment-4099 Mon, 07 Dec 2009 13:54:36 +0000 https://www.jestineyong.com/?p=309#comment-4099 HI Anand,

Sorry, i do not repair xbox thus i can't give any advice on that. I guess you may need to get the above ebook to try it out.

Jestine

Likes(0)Dislikes(0)
]]> By: anand https://jestineyong.com/xbox-360-repair/comment-page-1/#comment-4059 Tue, 01 Dec 2009 06:58:33 +0000 https://www.jestineyong.com/?p=309#comment-4059 my xbox have been sleeping for one year ready. i use it just for one year after that cant use it due to rod. Anyway no place to repair either. pls help

Likes(0)Dislikes(0)
]]>