Don't Miss

Samsung TV Schematic Diagram

By on August 19, 2007

 samsung television

While surfing the internet, i stumbled upon a samsung tv schematic diagram which is in pdf file. I guess those of you who are in the TV repair line would like it. If you are not a TV repairer i suggest that you download the file and begin to analyze it and who knows you might have learn something new from this samsung TV schematic diagram. Click the link below

Samsung TV Schematic Diagram

Check out also LCD/LED TV ebooks by Kent Liew here.

Likes(126)Dislikes(90)

418 Comments

  1. daniel

    September 17, 2011 at 1:04 pm

    can you explain how the audio and vedio circuit operate in a crt tv set

    Likes(3)Dislikes(0)
  2. admin

    September 20, 2011 at 7:14 am

    Hi Daniel,
    These are big subjects, I suggest that you get a book on tv repair from amazon.com because it has full explanation how both and other circuits work.

    Jestine

    Likes(5)Dislikes(0)
    • layne

      July 16, 2015 at 7:01 pm

      Good morning
      can u please give me the schematic diagram and the complete bill of components of my samsung TV model: CT-21K30MH.
      the capacitor on Horizontal output was burn and i want to replace it.
      but i dont know the value or capacitance

      Likes(1)Dislikes(1)
      • Jestine Yong

        July 16, 2015 at 9:13 pm

        HI Layne,

        Sorry I do not keep schematic. Try search from eserviceinfo.com

        Jestine

        Likes(0)Dislikes(0)
  3. ameen

    September 25, 2011 at 7:42 pm

    like to know the required tv flyback number for samsung tv model cs-29a6hp.pls help.

    Likes(2)Dislikes(0)
  4. admin

    September 26, 2011 at 2:50 am

    HI Ameen,

    Sorry no info o this.

    Jestine

    Likes(2)Dislikes(0)
  5. sushil patel

    September 30, 2011 at 10:41 am

    sirmy tv is samsung ultraslim model no cs21a551ml str mising i can know str no

    Likes(5)Dislikes(3)
  6. masood moosavi

    September 30, 2011 at 6:46 pm

    hi Dear
    pardon me
    i have a problem with my led tv samsung (ua46c6900vr)
    please help me if you can
    i enter to hidden menu and i do some changes in hotel mode : tuner 1 to 2 , encoding 1 to 2, pvr off to on ,tools ? to ?
    then restart tv
    tv ON & view screen yet but after 10-15 second tv automated to off , then automated ON , & again OFF , over & over was happened
    i Am in IRAN & support Center Not Answer yet & says only solution is change the motherboard!!
    I think that if i can do Full reset my TV (eeprom ) that'll working yet But I don't Know Main IC Flash correct & I don't know HOW
    ( Remote Control Not working then i can't use info-menu-mute-power , mute-1-1-9-ok ,mute-1-8-2-ok or EXIT Bottom To Rechange mode's Or Factory reset)
    What Solutions You suggest me , Please Help me
    my mail : smm13511@gmail.com

    Likes(6)Dislikes(0)
  7. admin

    October 1, 2011 at 2:20 am

    Hi Sushil,

    Sorry i do not have the schematic thus there is no info on the power ic.

    Jestine

    Likes(2)Dislikes(0)
  8. admin

    October 4, 2011 at 4:01 am

    Hi Masood,

    Sorry i do not have such info to solve the problem. I suggest that you visit eserviceinfo.com forum to post your question and hope there may be someone that have the answer.

    Jestine

    Likes(2)Dislikes(0)
  9. Brandon E.

    October 13, 2011 at 10:26 am

    Just browsing & found your Samsung Circuit Diagram, thanks

    Likes(1)Dislikes(1)
  10. khosrow

    November 2, 2011 at 10:07 am

    Hi dear admin
    I have a problem in my samsung tv CS21E40 in horizontal center ckt.
    resistor R423 is burn and DZ403 is short so horizeotal ckt is not working.
    I think R423 is a 910 ohms 3 watt resistor but I am not sure. also I do not know the voltage of zener DZ403. would you please help me for those values?
    thanks a lot.
    khosrow

    Likes(6)Dislikes(0)
  11. admin

    November 2, 2011 at 12:49 pm

    HI Khosrow,

    Since i do not have the schematic thus i can't find the right values.

    Jestine

    Likes(2)Dislikes(1)
  12. ROY G ROTA

    November 11, 2011 at 11:35 am

    Thermistor over heated

    Likes(1)Dislikes(0)
  13. Ramesh

    November 13, 2011 at 4:01 am

    I want to new the world of electronics and communication will you help me for this...

    Likes(1)Dislikes(0)
  14. Paul Muller

    November 21, 2011 at 10:49 am

    Please forward to me how to be come an computer CPU Expert

    Likes(2)Dislikes(0)
  15. naresh singh gour

    January 3, 2012 at 12:15 pm

    repair tips for ultra selim & LCD

    Likes(4)Dislikes(3)
  16. Dinesh

    January 8, 2012 at 11:29 pm

    Hi
    samsung tv model 21B500H5
    Av 2 working with sound and picture, but Av 1 working only sound without picture. I checked Av socute are ok. Solution?
    Please help me

    Likes(5)Dislikes(1)
  17. admin

    January 12, 2012 at 8:15 pm

    HI Dinesh,

    This could be a tough problem. It can be the eeprom program fault or the ic that controls the av have problem.

    Jestine

    Likes(2)Dislikes(1)
    • aneesh

      July 17, 2014 at 2:48 pm

      hai,
      my samsung ultra slim tv hot is dead, beause of leakage of eht cup.
      i change the cup and hot . but at the time of connecting the yok the hot will shorting. the hot voltage is 120. please help me

      Likes(1)Dislikes(1)
      • Jestine Yong

        July 17, 2014 at 8:00 pm

        Check this link:

        https://www.jestineyong.com/why-horizontal-output-transistor-in-crt-monitor-get-shorted/

        jestine

        Likes(1)Dislikes(0)
  18. sanu babu

    January 17, 2012 at 5:49 pm

    panosonic colour Tv model no tc-2051om power is not on no sound no light . hope you will repalaye

    Likes(1)Dislikes(0)
  19. admin

    January 17, 2012 at 7:45 pm

    HI Sanu,

    May i know what have you checked? Is there supply voltage to the power ic?

    Jestine

    Likes(2)Dislikes(0)
  20. afaf

    February 15, 2012 at 3:20 pm

    je vous ai remercie

    Likes(1)Dislikes(0)
  21. Ghulam Qamar

    March 2, 2012 at 2:47 am

    Hi, my name is Ghulam Qamar from pakistn . I am expert in tv repairing,assumbling and working from last 10 years in vareus ocasstion. can you make a chance for me that I can work with you or anybody other compni or repairing shop.

    thanks a lot.

    Likes(1)Dislikes(1)
    • Jestine Yong

      March 2, 2012 at 10:59 am

      Hi Ghulam,

      Sorry we do not hire more staff at this moment.

      Jestine

      Likes(1)Dislikes(0)
  22. angelo

    March 2, 2012 at 7:36 pm

    busco diagrala electronico de TV Samsun modelo LN32C450

    Likes(1)Dislikes(1)
    • Jestine Yong

      March 4, 2012 at 1:18 am

      HI Angelo,

      Sorry I do not keep schematic. Try check on eserviceinfo.com

      Jestine

      Likes(1)Dislikes(1)
  23. paul morante

    May 10, 2012 at 10:19 pm

    ahm what was the problem in a color because the color become rumble  i try to change the transistor right in the crt sucket board but there is no change occured..samsung tv....but when i see the wire going to pc board it connected to ic...is this the problem?

    Likes(1)Dislikes(0)
    • Jestine Yong

      May 11, 2012 at 1:27 am

      Hi Paul,

      Do you have a photo? If yes then please send to jestineyong(at)electronicrepairguide.com.

      Jestine

      Likes(1)Dislikes(0)
  24. suresh

    June 9, 2012 at 10:27 am

    TDA9380PS/N3/3/1664 ic using Sharp 21 NH61 model TV,power supply ok,no eht, ic AN5277 -PinNo.10 - 27v ok, PinNo.11 - 0v, set is stand by condition, please repair solution

    Likes(2)Dislikes(1)
    • Jestine Yong

      June 12, 2012 at 7:53 am

      HI Suresh,

      You need to check if there is any pulse going to the base of HOT. No pulse means no high voltage eventhough the B+ voltage is good.

      Jestine

      Likes(1)Dislikes(1)
  25. rickz

    June 10, 2012 at 11:59 pm

    busted voltage regulator of samsung model CT 17k10MQ but no available in market wat is the replacement for this?

    Likes(1)Dislikes(0)
    • Jestine Yong

      June 12, 2012 at 7:51 am

      HI Rickz,

      Have you try utsource.net?

      Jestine

      Likes(1)Dislikes(0)
  26. venkatesh

    June 11, 2012 at 12:11 pm

    hi justine.thnx for doing a service like this.but required lots of improvements. we r with u. go ahead

    Likes(2)Dislikes(0)
  27. Ray (uk)

    July 11, 2012 at 6:47 pm

    Hello Jestine - can you tell me if there is a replacement alternative board for -
    LCD  Inverter  part no HIU-641C / HPC-1561D from Samsung LE26R74BD
    Many thanks Ray

    Likes(1)Dislikes(0)
    • Jestine Yong

      July 16, 2012 at 9:50 pm

      Hi Ray,

      I have checked and sorry no info on this.

      Jestine

      Likes(1)Dislikes(0)
  28. Kruse Finn

    August 5, 2012 at 8:59 pm

    Have a older Samsung TV model LE27T51B start up with sound and shortly there is backlight in 1 sek and then gone but tv sound is ok , but no Backlight , have tryed to solder all transformers and checked for bad connections ,  can you help me ? 

    Likes(0)Dislikes(0)
    • Jestine Yong

      August 7, 2012 at 7:07 am

      Hi Kruse,

      If there is no bad e-cpas then one of the backlight may have problem.

      Jestine

      Likes(0)Dislikes(0)
  29. Wilfred

    September 13, 2012 at 5:48 am

    Could you please send me the schematic drawing of Samsung LCD TV Model  LA48A680M1M
    Thanks

    Likes(0)Dislikes(0)
    • Jestine Yong

      September 14, 2012 at 9:22 pm

      Hi Wilfred,

      Sorry I do not keep any schematic diagram. Try eserviceinfo.com

      Jestine

      Likes(0)Dislikes(0)
  30. alberto

    September 14, 2012 at 12:24 pm

    Hi I have a samsung lcd source BN44-00338b which generates only 8 volts me where deve give me 24 and I have a friend who knows the fault but I say it, thanks for your help

    Likes(0)Dislikes(0)
    • Jestine Yong

      September 14, 2012 at 9:30 pm

      Hi Alberto,

      Do you mean the power supply suppose to generate 24 volt but now only have 8 Volt? If yes then check for bad e-caps along the output line and make sure the output diode (schottky diodes) is not leaky. Sometimes a shorted component component in the mainboard will pull down the output voltage too.

      I'm assuming you check if all the other output voltages are good in the power supply.

      Jestine

      Likes(0)Dislikes(0)
  31. jojogreg

    September 18, 2012 at 9:58 am

    hi jestine,
                    Is the mainboard of lcd monitor repairable?like The one that  i repaired brand name HANNS.G that i suspect is the mainboard was the problem becausE of the on and off  condition.Is the MCU is involve in this problem or the cyrstal?

    Likes(0)Dislikes(0)
    • Jestine Yong

      September 19, 2012 at 12:48 am

      Hi jojo,

      If the supply are good to the MCU IC then most probably the MCU could have fault. MCU, Eeprom and flash rom ic if you have the original data then you can overwrite the old data with a programmer. The problem is sometimes it is hard to find the original programs for those ICs.

      Jestine

      Likes(0)Dislikes(0)
  32. braian muleta

    September 19, 2012 at 11:39 pm

    what is the power supply regulator ic of samsung tv model ct-21z30ml?...

    Likes(0)Dislikes(0)
    • Jestine Yong

      September 20, 2012 at 1:49 am

      Hi Brian,

      Sorry i do not keep any schematic diagram. try eserviceinfo.com

      Jestine

      Likes(0)Dislikes(0)
  33. beboy

    September 28, 2012 at 3:14 am

    HI,
     kindly help me because my samsung monitor ,the problem is when can can i switch on in second the back light off.

    Likes(0)Dislikes(0)
    • Jestine Yong

      September 28, 2012 at 8:23 pm

      Hi beboy,

      It could be bad e-caps or one of the backlights have problem.

      Jestine

      Likes(0)Dislikes(0)
  34. Rafaqat Ali

    September 28, 2012 at 4:14 am

    TV SAMSUNG MODEL CW 5082V HOT WAS SHORT.REPLACED HOT WHEN SW ON TV IT GOES TOSTANDBY.AT COLLECTOR OF HOT 133V PRESENT.I ALSO CECKED 5V SUPPLY IS AVAILABLE OTHER SUPPLIES OF FLYBACK TRANSFORMER NOT AVAILABLE .PLZ SUGGEST WHAI CAN I DO?
     

    Likes(3)Dislikes(0)
    • Jestine Yong

      September 28, 2012 at 8:34 pm

      Hi Rafaqat,

      Standby mode means either the cpu, optoisolator circuit or even the main power supply itself have problem. First make sure the cpu is getting the right voltage, and you may need to check for bad components in the optoisolator ic area. Check also to see if there is any supply voltage to the power ic in the main power supply.

      Jestine

      Likes(0)Dislikes(0)
  35. victor 4rm lagos

    October 1, 2012 at 12:10 pm

    Sir iam greatful 4 ur time & assistance so far. my tv lcd 19 widescreen; no display & i changed d inverter den it display 4 a seconds & d screen goes off but when i used 17 screen it works fine & i tested d 19 wide wt another monitor it works fine & it doesnt work on the tv. i even use external ccf lamp to test d inverter all workfine, but it doesnt work wt 19wide screen.the sound is perfect.so i dont know why is not worklng 4 d 19 that is mean 4 it

    Likes(0)Dislikes(0)
    • Jestine Yong

      October 1, 2012 at 9:30 pm

      Hi Victor,

      Did you replace with the same inverter? as some inverter are very sensitive to the feedback current that it got from the backlights.

      Jestine

      Likes(0)Dislikes(0)
  36. Dhirendra Kumar Gusain

    October 15, 2012 at 10:59 pm

    Dear sir,
    I am change a chassis fitted in model AA41-01262E new chassis  CDIAA41-01344 Ic used TDA12155 but ew is not control  please tell me some modification in new circuit. So help me new fitted in new pcb. Thanking you

    Likes(0)Dislikes(0)
    • Jestine Yong

      October 17, 2012 at 5:27 am

      HI Dhirendra,

      Sorry I do not have such info. Actually the best is still use back the original replacement board. A substitute board will give lots of problem like lack of vertical height, curve display and EW problem.

      Jestine

      Likes(0)Dislikes(0)
  37. Hem

    November 21, 2012 at 9:52 am

    Sir, where can i get parts for LCD Samsung made in South Africa Model: LA40D550K7WXMV thanks in advances...........

    Likes(0)Dislikes(0)
    • Jestine Yong

      November 21, 2012 at 7:04 pm

      Hi Hem,

      Try check with Samsung authorized distributor. You can get the information from computer shops because they usually know where the place is.

      Jestine

      Likes(0)Dislikes(0)
  38. denzil

    January 10, 2013 at 7:34 am

    there is black strip on my tv

    Likes(0)Dislikes(0)
    • Jestine Yong

      January 10, 2013 at 9:05 pm

      Hi Denzil,

      Check the filter cap with esr meter and make sure no dry joints in the horizontal yoke area.

      Jestine

      Likes(0)Dislikes(1)
  39. Anjan

    May 7, 2013 at 8:11 pm

    Dr sir,
    im Anjan, from,BANGLADESH.
    My Samsung tv model is:- Cs-20v10mj
    what a power 'STR Number' of this tv?

    Likes(0)Dislikes(1)
    • Jestine Yong

      May 7, 2013 at 9:41 pm

      HI Anjan,

      Sorry I do not have the schematic thus I don't know the number. Try check from eserviceinfo.com

      Jestine

      Likes(0)Dislikes(1)
  40. Ahipo Serge

    September 24, 2013 at 6:34 pm

    je cherche un schema pour ma tv samsung cs21b500hl

    Likes(0)Dislikes(1)
    • Jestine Yong

      September 25, 2013 at 8:59 am

      Hi Ahipo,

      Sorry we do not keep any schematic.

      Jestine

      Likes(0)Dislikes(0)
  41. Marvellous Manoj

    September 26, 2013 at 9:20 pm

    i want to est number of samsung hitron 29 inch model cs7404sv

    Likes(0)Dislikes(0)
    • Jestine Yong

      September 27, 2013 at 10:24 am

      Hi Manoj,

      Sorry no info on this.

      Jestine

      Likes(0)Dislikes(0)
  42. Amir Mukhtar

    February 4, 2014 at 11:25 pm

    Sir Jestine

    Nice Sharing

    thanks you
    Amir Mukhtar AShrafi

    Likes(0)Dislikes(0)
  43. ramprasad soni

    February 26, 2014 at 11:12 pm

    thought I am retired from IAF and electronics hand. I have a color TV made of Samsung India. Its 14/38. Whenever I swith on this TV lase light gets on. When I push Switch "on" TV does not start. I have wait for 10-15 minutes,then only it starts. As if any condenser gets charged first then it allows

    Likes(0)Dislikes(0)
    • Jestine Yong

      February 27, 2014 at 10:27 am

      Hi Ramprasad,
      Try check the filter e-caps in the power supply secondary side.

      Jestine

      Likes(0)Dislikes(0)
  44. Julz

    July 31, 2014 at 6:01 pm

    Samsung LA22A450C1

    Hi Sir Jestine, My LCDTv already checkup by Samsung service center. Motherboard need replacement as they say. But they don't have any stock. Please guide me if any of the parts can be replace.
    Initial symptoms need to press power many times before it opens. Led lit and static when powers up. After that a million press on remote cannot power on the unit. LED still lit power supply already flood replacement. Hope I can revive this poor thing... thanks.

    Likes(0)Dislikes(0)
    • Jestine Yong

      August 1, 2014 at 8:00 am

      Hi Julz,

      Try check if the SMD voltage regulator ICs in the motherboard producing good output dc voltages or not.

      Jestine

      Likes(0)Dislikes(0)
  45. Paranikumar

    August 2, 2014 at 1:13 am

    Hi Sir,
    Topic - SAMSUNG - PS42B430P2. (Plasma 42").
    Trouble - Blank screen but Audio-Good.
    Earlier, When TV was turned on, picture had pink grains for few minutes then video was good.
    Now, picture has pink grains for few minutes then video is blank.
    Pls suggest a solution.

    Regards,
    Paranikumar

    Likes(0)Dislikes(0)
    • Jestine Yong

      August 3, 2014 at 4:30 pm

      Sorry i have not come across such problem but possible could be cause by dry joint you mentioned earlier the picture had pink grains for few minutes then video was good.

      Jestine

      Likes(0)Dislikes(0)
  46. Suraj Tiwari

    September 11, 2014 at 6:38 pm

    Hello sir, I have samsung 21" crt television. It has start up problem,it won't be on. sometime it get started and run for long time but sometime it run for short time period while checking all power supply volts are good what might be the problem and its solution please help me

    Likes(0)Dislikes(0)
    • Jestine Yong

      September 12, 2014 at 11:53 am

      Hi Suraj,

      When it can't start did you see any power led light on? if no light check to see if the cpu ic in the tv is getting 5 volt or not.

      Jestine

      Likes(0)Dislikes(0)
  47. DRio

    October 23, 2014 at 12:48 am

    Hi there...
    Need your advice....
    Samsung cz-29z45mh
    Half black display appear on screen
    Why and how to fix it?

    Likes(0)Dislikes(1)
    • Jestine Yong

      October 23, 2014 at 9:37 am

      Check the dc supply to the vertical output ic. If the supply and the corresponding components are good then direst replace the vertical output ic.

      Jestine

      Likes(0)Dislikes(0)
      • DRio

        October 24, 2014 at 8:09 pm

        Is it near the flyback transformer?

        Not sure of the exact location

        It would be helpful if you can share the schematic @ wiring diagram of the system

        Tqvm

        Likes(0)Dislikes(0)
        • Jestine Yong

          October 24, 2014 at 10:33 pm

          Sorry i do not keep schematic. it is an IC that is usually attach to heat sink. Search the ic part number and confirm it that is is indeed the vertical output ic.

          Jestine

          Likes(0)Dislikes(0)
          • DRio

            October 25, 2014 at 6:54 pm

            The TV has operate normally as it should be!!!

            Tq so much 4 your tips & advice.

            Sony LCD tv model no KLV-40EX430

            TV blackout

            Likes(0)Dislikes(0)
  48. bhavdip boghara

    November 17, 2014 at 3:53 pm

    how to connect hometheater in my samsung tv cs21A551MLKLXL

    Likes(0)Dislikes(0)
  49. dksa

    January 4, 2015 at 12:36 am

    Dear All
    My Samsung CZ-21M63N won't show picture couple minutes on start. Sound is OK... all voltages is Ok, G2 also is Ok. I changed some caps near line transformer but haven't success. Have you idea where is the problem. Many tanks in advance...

    Likes(1)Dislikes(0)
    • admin

      January 6, 2015 at 3:36 pm

      Hi Dksa,

      Do you mean after couple of minutes then only it can start?

      Jestine

      Likes(0)Dislikes(0)
      • dksa

        January 10, 2015 at 6:47 pm

        Hi Jestine,
        No. I have audio, but haven't picture. After couple minutes picture comes with interruption... When I replace resistor R513(0.68R) with jumper on heating screen tube situation is much, much better. Have you idea for better solution? (except for changing the screen TV's)
        Dksa

        Likes(0)Dislikes(0)
        • admin

          January 10, 2015 at 9:39 pm

          Try this link:

          http://www.repairfaq.org/samnew/tvfaq/tvbrightcrt.htm

          Jestine

          Likes(0)Dislikes(0)
  50. John wani

    January 24, 2015 at 10:19 pm

    My samsung hitron tv has only sound no picture just white screen with lines

    Likes(0)Dislikes(0)
    • Jestine Yong

      January 26, 2015 at 9:30 am

      HI John,

      CRT or LCD TV?

      Jestine

      Likes(0)Dislikes(0)
Open

Close