Servicing Samsung LED Monitor 632NW
This monitor was brought to me with the complaint that it was dead. On inspection, noticed that the AC female socket had fungus attack and burnt marks due to arcing. Noticed water seepage also, probably by rains splashing through open windows. It had rusted too! Opened the set and removed the female socket. Removed the earth pin as I wanted the holding metal cover riveted to it, since the replacement available was of a different type.
Fixed the socket, using the old metal holding cover, and manipulating the rear pins of the new socket, and adding extra tags to solder it firmly on the PCB.
I had to adjust the socket perfectly by keeping the back cover in place, before I soldered the metal holding cover. It was a perfect fit as you can see from the following snap.
ESR of all caps was ok. Just touched a few dry solder on the PCB. Powered it on through a series bulb and it worked perfectly well.
Tested it thoroughly and found it to be working well.
Another job added to my satisfaction list!
This article was prepared for you by Parasuraman Subramanian from India. He is 69 years old and has more than 30 years’ experience in handling antique equipment like Valve Radio, Amps, Reel Tape Recorders and currently studying latest tech-classes conducted by Kerala State Electronics Technicians’ Association. He has done graduation in BBA degree, private diploma in Radio Engineering and retired as MD of a USA company. Presently working as Consultant to Hospital and other institutions.
Please give a support by clicking on the social buttons below. Your feedback on the post is welcome. Please leave it in the comments.
P.S-If you enjoyed reading this, click here to subscribe to my blog (free subscription). That way, you’ll never miss a post. You can also forward this website link to your friends and colleagues-thanks!
You may check on his previous repair article below:
https://jestineyong.com/leaked-and-rusted-e-cap-found-in-sansui-tv/
albert van bemmelen
July 2, 2018 at 8:53 pm
Pro job as always! And I learned a word I only knew its meaning and how to pronounce it but not how to write. Now I do: seepage.
Humberto
July 3, 2018 at 4:25 am
Another device saved from the dump, great job Mr. Parasuraman.
Robert Calk Jr.
July 3, 2018 at 5:08 am
Good job, Parasuraman.
Yogesh Panchal
July 3, 2018 at 2:45 pm
I need Circuit diagram of CRT TV "SONY KVJ21MF 1AK" if any one have.
Yogesh Panchal
July 3, 2018 at 2:53 pm
Good Job Sir,
Sir can you provide us Detail of pattern generator you have used here.
Parasuraman S
July 3, 2018 at 10:07 pm
Please zoom the picture and see. Then give a search in google. I bought it from Aliexpress.
James
July 3, 2018 at 3:42 pm
I bet you did this one with your eyes closed aye' :[) LoL
wenk
July 21, 2018 at 12:47 am
great work a silent follower from kenya'help this dest error on sony dvd theater.