Don't Miss
Zener Diode Selector Guide
By Jestine Yong on March 30, 2009
Thanks to Zed Pato for letting me know about this link. If possible print out the zener diode pdf guide for future reference.
NTE offers one of the broadest lines of Zener diodes in the industry, and should be your first stop when you need dependable high quality zener diodes.
We feature:
- 1/2 watt DO-35 axial lead from 2.4v to 200v, 5% tol.
- 1 watt DO-41 axial lead from 2.4v to 200v, 5% tol.
- 5 watt axial lead from 3.3v to 200v, 5% tol.
- 10 watt DO-4 stud mount from 3.9v to 200v, 5% tol, available in standard and reverse polarity
- 50 watt DO-5 stud mount from 3.9v to 200v, 5% tol, available in standard and reverse polarity
NTE also has a selection of 1/2 watt 1% tolerance DO-35 types, and 300mW SOT-23 surface mount types.
To view a selector guide on our zener diodes click on this link
http://www.nteinc.com/Web_pgs/zener.pdf
To cross reference an industry device number to the NTE equivalent click on this link
http://nte01.nteinc.com/nte/NTExRefSemiProd.nsf/$$Search?OpenForm
Likes
(0)Dislikes
(0)
(0)Dislikes(0)
4 Comments
Leave a Reply
Mahmoud
April 19, 2010 at 11:00 am
We need Zener to be used as a voltage regulator in a circuit use 48 VDC and we need to drop it to 24 VDC .
the current is varying from 4-20 mA as analog signal.
admin
April 21, 2010 at 9:16 am
HI Mahmoud,
Since I'm more on electronic repairing and not designing thus i can't provide any advice on this. However, if you have any electronic repair question you can always email me.
Jestine
T. HOWELL
August 2, 2010 at 2:41 pm
Dear Sir I am having a problem with a Powercraft 2200lr generator it is made I believe in china the generator has only worked for 2 hours now it will not run I am trying to get a diode C27ST but can not find any listing for it. It is on a control circuit board behind the front panel the other 2 scrs on the board I have been able to get but I do not know if this is a signal or zener diode thank you
admin
August 3, 2010 at 9:23 am
Hi Howell,
May i know what is written on the board- Z or D? If it is Z then it could be a 27 volt zener diode.
Jestine