Don't Miss
Testing Capacitor Value
By Jestine Yong on July 6, 2013
I have Question about how to test this type of component if they are bad or good (.15j100) (1j63)
Answer:
Test with digital capacitance meter. The first one is .15uf 100v or 150 nanofarad and the second one is 1uf 63 volt. You can easily get a digital capacitance meter from any local electronics shop or from ebay dot com. If the value that you get is less than the rated value (more than 10% tolerance) then you need to replace the capacitor. If possible replace with the same type of capacitor because in certain circuit it only work fine with the same type and not other type.
Likes
(2)Dislikes
(0)
(2)Dislikes(0)
