Don't Miss

A Flash Light That Does Not Light Up Repaired

By on February 4, 2023
A Flash Light That Does Not Light Up Repaired

 

 

 

 

 

 

 

A farmer brought this flash light for repair. It is a good big flash light that can be charged using a USB input; it shows a sign of charging but it does not light up which I think have to do with the battery but let us find out the fault for sure.

repair flash light

I already took the flash light apart for check up and headed directly to the LED lights here and found them to be ok.

The next option was to check for the power switch but it was also in good shape. One thing left to check was the batteries.

how to repair and fix flash light

how to repair flash light

I already took the top off and tried to get to the main power source,

the batteries down below but I could not get to them from this side.

fixing flash light

Six screws were hidden under a plastic rim and once these were taken out, I was able to reach the batteries from the other side of the flash light.

how to fix a broken flash light

The batteries were completely dead and needed replacement and I think I have the same exact one sitting in my shop to be used.

servicing flash light

I took the old batteries out and I had to take the plastic ugly thing out that was holding the batteries down and I once soldered the new batteries in, well, take a look

flash light repair

It is funny how that finding the fault and replacing the batteries are completely different things to do because it was a hassle taking this flash light apart but once I got it open and batteries exposed, the repair was done.



Mission Accomplished.  

waleed Rishmawi

This article was prepared for you by Waleed Rishmawi, one of our ‘Master Authors’ and currently working in the Bethlehem area of Palestine repairing electrical and electronic equipment.

P.S- Do you know of any your friends who would benefit from this content that you are reading now? If so, forward this website to your friends or you can invite your friends to subscribe to my newsletter for free in this Link.

Note: You can check his previous article on Zika A-200 Welding Machine Powers On But Does Not Weld Repaired

 

Likes(52)Dislikes(0)

8 Comments

  1. Albert van Bemmelen

    February 4, 2023 at 5:27 pm

    From the phrase "I have the same exact one sitting in my shop to be used", I guess your shop is still expanding in size daily? (lol) In this respect it must be a blessing to have a brother living right nextdoor to share some space, if I'm not mistaken?

    Likes(1)Dislikes(0)
    • Waleed Rishmawi

      February 4, 2023 at 7:14 pm

      Albert: not really but everything I that I buy are organized in drawers and donners boards are stored in plastic containers. it is a matter of organizing what I have. yes I am exanding but not in phyiscal sense. my brother's shop is next door isolated by a thick wall and he has the biggger space. have a blessed day

      Likes(1)Dislikes(0)
  2. Parasuraman S

    February 4, 2023 at 5:51 pm

    Amazing way of finding how to make entry into a device! Your expertise came into action!

    Likes(1)Dislikes(0)
    • Waleed Rishmawi

      February 4, 2023 at 7:15 pm

      Parasuraman: it took me a while to figure out how to get to the battery and that is patience going a long way. have a blessed day

      Likes(1)Dislikes(0)
  3. Tayo

    February 4, 2023 at 11:49 pm

    I think I see one of the issues. These rechargeable batteries seem not to have protection circuitry. The protection works two-fold. It prevents the battery from overcharging but also prevents it from deep discharge by disconnecting he load when the battery level goes below a certain level. If it had that there would always be some charge in the battery which prevents it from going completely dead and not ready to be recharged. Its likely the flashlight will make a return visit to your shop Waleed. 😛

    Likes(0)Dislikes(0)
    • Waleed Rishmawi

      February 6, 2023 at 4:40 pm

      Tayo: yes I see and Understand your point of view but so far I have got it back for service in the shop. Infact the same customer brought me more stuff to fix because he was pleased with the service I am providing. have a blessed day

      Likes(1)Dislikes(0)
  4. Yogesh Panchal

    February 5, 2023 at 6:16 pm

    Good Fix!Waleed

    Likes(1)Dislikes(0)
    • Waleed Rishmawi

      February 6, 2023 at 4:40 pm

      Yogesh: thanks man. have a blessed day

      Likes(1)Dislikes(0)

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close