All posts by Jestine Yong
-
No Power In Kinwin PSU ABT-800MA1S
Please help me to identify a fault on Kinwin PSU ABT-800MA1S. The PSU is dead and silent with fuse good. Voltage testing: AC input is ok The filter capacitor is ok The Supply voltage of power IC...
- Posted June 24, 2013
-
A Door Motor Control Board Repair
A strange thing happened today as I was working in the shop; an electrician came in and showed me a door motor control board. I checked it out and found some nasty burns marks on it. There...
- Posted June 23, 2013
-
Is Electronics Repair A Dying Trade?
Sir, please tell me whether electronic repairing business is a dying trade, since i am interested to do lcd/led repairing as my full time business. ========================== Electronics repair cannot...
- Posted June 23, 2013
-
About Sunwa Analogue Multimeter
In your book “electronic component testing” you stated that you use an analog meter with a 9v and 2x 1.5v. I looked up the specs on the meter you use, the Sunwa yx-360trn and it only uses...
- Posted June 22, 2013
-
5 Volt Line Not Stable in LCD Monitor
I’m having trouble pinpointing the fault of a non powering LCD monitor, the +12V line checks good (stable 13V) But the +5V line gives me a non stable reading with a DMM, I’ve tried an analog meter...
- Posted June 22, 2013
-
Capacitor Type In LCD Monitor Inverter
I replaced the 2 NPNC5706 transistors because of shorted COLLECTOR and EMITTER leads. But everywhere i look for these white rectangle caps i find no data available for this item. I do not know the values of...
- Posted June 22, 2013
-
CRT TV Color Problem
Hi Mr Yong i have a 21″ crt tv. The crt tv color problem is it shows reddish picture. A yellow colour shows orange. Whats the problem? Answers: Check the CRT board if one of the color...
- Posted June 22, 2013
-
What is the AC voltage from the 14″ LCD Monitor Inverter?
Sir how much voltage that comes out from the good inverter of 14 ‘ pc lcd monitor, This can be test by a simple analog tester? Answer: About 500 to 800 vac depending on the model. Some model...
- Posted June 22, 2013






