All posts by Jestine Yong

• About Error Codes

  Once in a while i do receive emails from fellow ERG members to ask about the meaning of certain error codes in electronic equipment. The error codes can comes from the digital terrestrial receiver, fax, printer, audio...

  • Posted April 5, 2010
  • 0
• Visitors From Italy

  Few months ago, I received an email from a repair friend Roberto Salerno (the guy who publish monthly electronic repair magazine (in Italian language)) saying that his friend and his wife will be coming to my country...

  • Posted April 4, 2010
  • 2
• Will Dot Matrix Printer Go Obsolete?

  You have seen lots of new model of printers (Laserjet and deskjet) coming out to the market but for the dot matrix printer, it was a bit slow. So, will Dot Matrix Printer go obsolete? The answer...

  • Posted April 3, 2010
  • 7
• Electronic Supplier From Netherlands

  Found another electronic supplier and this time it is from Netherlands. Feel free to browse through the website as it may have the parts that you are looking for. Please click on the photo to visit the...

  • Posted April 2, 2010
  • 0
• Block Diagrams Of Electronic Equipments

  Two days ago i posted about the function of inductors and the article was from the TDK  Japan websites. If you go into the main website and visit one of the link, you would see that it...

  • Posted April 1, 2010
  • 4
• The Printer Repair Course

  For your information this Printer repair course was conducted by my working partner Mr William and this course was attended by four participants from Management And Science University. They work as IT Lab assistant. This is a...

  • Posted March 31, 2010
  • 8
• Function Of Inductors

  Found an article about the function of inductors where you can easily understand it. Remember to print it out for reference just in case if you have forgotten about the function of inductors. Please click on the...

  • Posted March 30, 2010
  • 7
• The Meaning Of Reset In Power IC

  There is usually a reset latch in power IC. If there is over/under voltage or current the power IC will shutdown to protect itself. Reset in this case means you have to turn off and then turn...

  • Posted March 29, 2010
  • 2