All posts by Jestine Yong
-
Shutdown Teac Tv Alive Again
This tv was brought by a widow who pleaded earnestly for the tv to be repaired, but I told her am not sure of success but i will try, since i...
- Posted January 27, 2024
-
Miracle Restoration Of A Prestigous Normende Tube (Valve) Radio
I am so excited to write this article because of a miraculous result that enabled restoration of this wonderful antique Radio, after several futile efforts put in for weeks together! This Radio...
- Posted January 27, 2024
-
Completed The Basic Electronics Repair Level 1 Course
Completed today another Basic Electronics Repair Level 1 Course For 7 participants. Below is a video and photos taken during the 3 days course Likes(19)Dislikes(0)
- Posted January 24, 2024
-
Fixing A Honda Activa Two Wheeler Speedometer
This Analogue speedometer/odometer which had fuel indicator was brought to me by a regular customer. After handling the digital speedometer of my own TVS Wego two wheeler long back, this is...
- Posted January 20, 2024
-
A Welding Machine With The Amp Display Cannot Be Controlled. Model: Delta mmA200
A guy who lives in Jerusalem experienced this kind of fault in this welding machine and called me right away to bring it over so I can take a look at...
- Posted January 20, 2024
-
Revisit Of HCT TV Monitor Model HLD-150MDP After A Gap Of Two Years
Those of you who have not read my previous article published in April, 2021 may please read it before reading this article, as I am not repeating many of the images...
- Posted January 20, 2024
-
Completed Another Advanced Electronics Repair Level 2 Course
Completed today another Advanced Electronics Repair Course for 6 participants. This is the first course for this year 2024! Next week will have another class. Below is a video and...
- Posted January 19, 2024
-
A Full HD Car DVR Does Not Power Up For An Obvious Reason Repaired
A guy works in a TV station near buy brought me this car DVR for repair and said that it does not power up due to the fact that the main power port is ripped off board....
- Posted January 13, 2024












