Bought A Used Oscilloscope

I  bought a used Kenwood 70MHZ analog scope today and it comes with two new x 10 probes. I suppose to buy a 100Mhz but there was no more stock so i took the 70MHZ instead. It was like a new scope and i was informed that it was hardly used. The price was about USD300+ and i bought it for my student to use. The guy who sold me the scope bought a Blue ESR meter kitset from me. He already owned the Peak ESR meter and would like to compare how good the Blue ESR meter is. You may check out his website by clicking HERE. Here are the photos of the scope and you could see that it is like a new scope:

Likes(1)Dislikes(0)

8 Comments

1. 

   beh

   January 20, 2011 at 9:17 am

   HI JESTINE

   it is just like new scope/ American brand . it is a good deal
   happy scopping
   beh

   Likes(0)Dislikes(0)

   Reply
2. 

   admin

   January 20, 2011 at 10:54 am

   HI Beh,

   It was a best buy!

   Jestine

   Likes(0)Dislikes(0)

   Reply
3. 

   Ravendra

   January 22, 2011 at 5:48 am

   hi jestine

   this scope looks gud, but do u use any digital scopes with lcd screens. which type is better ?

   ravendra

   Likes(0)Dislikes(0)

   Reply
4. 

   Bernard

   January 22, 2011 at 11:51 am

   Hi Jestine,

   Kenwood popular brand, Jestine seems you have a quite a few scopes in your center. which one Jestine will normally use.

   Likes(0)Dislikes(0)

   Reply
5. 

   admin

   January 23, 2011 at 10:29 am

   HI Bernard,

   I prefer the 50mhz analog scope but i will try out this 70mhz.

   Jestine

   Likes(0)Dislikes(0)

   Reply
6. 

   admin

   January 23, 2011 at 10:37 am

   HI Ravendra,

   Since i do not have the lcd screen scope yet thus i can't give any advice on this-sorry.

   Jestine

   Likes(0)Dislikes(0)

   Reply
7. 

   Weazel

   June 25, 2012 at 4:03 am

   i have if memory serves rite the 15 somethink memory scope 25mhz scope much like this with add on memory bank (doesnt work) and came with add on to write on screen (dont have) never could get the manual or serving stuff it was a ok scope needs servicing 
   i have about 10 scopes old 60's valve 1s mostly the 70~80's 1s with the sort after ecc88 valves
   and a 300mhz ex military tek scope 25XX somethink 
   i find the old 1s are way more handy in servicing equipment can handel the higher mains voltage got phillips 1 that can input 400v

   Likes(0)Dislikes(0)

   Reply
   • 

     Jestine Yong

     June 26, 2012 at 7:56 am

     Hi Weazel,
     Thanks for sharing!

     Jestine

     Likes(0)Dislikes(0)

     Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.