Don't Miss

Completed Another Basic Electronics Repair Level 1 Class

By on July 12, 2024
Petronas MTBE Engineers and Technicians

 

 

 

 

 

 

Completed today another Basic Electronics Repair level 1 Class for 10 participants. Below is a video and photos taken during the 3 days course:

kursus elektronik untuk petronas Kuantan

kereta grounding kabel

testing transistor course

pwn engineer

pwn engineer attend repair course

kursus baiki elektronik Malaysia

how to fix electronics course in Malaysia

kursus membaiki PCB

PETRONAS MTBE ENGINEER

HOW TO REPAIR PCB COURSE

PETRONAS KUANTAN MTBE

kursus baiki elektronik di Malaysia

Petronas MTBE Kuantan ambil kursus elektronik

 

Likes(20)Dislikes(0)

6 Comments

  1. Parasuraman S

    July 12, 2024 at 10:53 pm

    Glad to see an increase in the population of expert technicians! Congratulations and all the very best to one and all!

    Likes(0)Dislikes(0)
    • Jestine Yong

      July 13, 2024 at 10:31 am

      Hi Parasuraman,

      Thanks for the comment!

      Jestine

      Likes(0)Dislikes(0)
  2. Albert van Bemmelen

    July 13, 2024 at 3:01 pm

    Congratulations to all participants!
    The photos showed that the good old semiconductor testing method with analogue or digital multimeter is preferred over using the digital semiconductor testers like available from Peak Atlas or other firms. But for testing those very tiny triodes like smd mosfets I myself prefer using the DCA75 Pro with SOT23 test adapter model PCA23 (also from Peak Atlas). Because after removing such tiny parts for testing this makes more sense. Also because a DMM or AMM only has two probes while my modern tester already has three. And holding these tiny smd parts in your hand while using those probe leads is quite impossible to do too. With the risk of breaking off those tiny legs. Like testing such a tiny triode yesterday with smd marking E6SY8 that proved to be a good working P-channel mosfet.

    Likes(1)Dislikes(0)
    • Jestine Yong

      July 13, 2024 at 4:22 pm

      Hi Albert,

      Thanks for the comment and I totally agreed with you about testing the small SMD components using Peak Atlas Tester! For your info they are in the Level 1 course so using the Digital and Analogue multimeter would be a good start for beginners. As they progress to higher level, students would be able to use more advanced meters/testers in their troubleshooting work

      Jestine

      Likes(1)Dislikes(0)
  3. Yogesh Panchal

    July 13, 2024 at 3:01 pm

    Congratulations! Everybody & welcome to field for electronics Repair.

    Likes(0)Dislikes(0)
    • Jestine Yong

      July 13, 2024 at 3:20 pm

      Hi Yogesh,

      Thanks for the comment!

      Jestine

      Likes(0)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close