Don't Miss
Completed The Higher Advanced Electronics Repair Course
By Jestine Yong on October 9, 2020
Just completed today the Higher Advanced Electronics Repair course for the two students that had attended the Advanced Electronics Repair course last week. They had completed the Basic Electronics Repair course about two weeks ago. For more info about the technical courses please click on this link. Below are the photos taken during the three days repair course:
Likes
(12)Dislikes
(0)
(12)Dislikes(0)
8 Comments
Leave a Reply
Parasuraman S
October 9, 2020 at 9:43 pm
Congratulations to one and all! All the very best!
Jestine Yong
October 10, 2020 at 7:05 am
Hi Parasuraman,
Thanks
Jestine
Yogesh Panchal
October 9, 2020 at 9:45 pm
Congratulations! to new comers.
Jestine Yong
October 10, 2020 at 7:04 am
Hi Yogesh,
Thanks
Jestine
Ross Holland
October 10, 2020 at 12:27 am
Congratulations, I am sure your hard work will be of many benefits to your future careers, Stay Safe.
Jestine Yong
October 10, 2020 at 7:05 am
Hi Ross,
Thanks.
Jestine
Albert van Bemmelen
October 11, 2020 at 12:31 am
After three days of intensive training with great result a well spend course! Congratulations to both!
Seeing the photo of the engineer holding one blue soldergun(?) in his right hand and another long tool in his left hand, I wondered what he exactly was doing. I take it it was not an extra strong desoldering pump he was holding in his left hand? Maybe he was applying cooling paste? Never used such a large tool myself before?
Jestine Yong
October 11, 2020 at 7:27 am
Hi Albert,
It was a Goot brand made in Japan desoldering tool. The suction is good and gentle (not too strong because if too strong, sometimes the circuit track pad can be pulled out also) and I fully recommend this brand as compare to others.
Jestine