Don't Miss
How To Remove The Silicone In The Circuit Board
By Jestine Yong on September 8, 2010
Usually i would scrap off the silicone layer and use thinner to clean it but it will take me lots of time to do it especially the boards that have lots of components in it like the automobile control ECU board and etc. I believe there must be some fast way to remove such thing from the circuit board. If you have the way to do it i guess the blog readers would be really appreciate about this-thanks!
Likes(30)Dislikes(8)
mohamed fathi
September 8, 2010 at 1:09 pm
hello Mr. Jestine
yes that is right, sometimes i use the hot air to remove it
beh
September 8, 2010 at 1:20 pm
HELLO JESTINE
i found this solvent for silicon hope is useful:
http://www.valco-cp.com/solvent200.htm
beh
Sam C
September 8, 2010 at 3:39 pm
I use Goof Off. It is a strong paint remover and will solve plastic if left on long enough. Try it on scrap circuit board first.
Silicon Be Gone softens old silicone for easy removal and should be safer although I have not tried it.
Chirag b gaudana
October 14, 2020 at 12:02 pm
I please help me
Whot the washing machine pcb epoxi silicone chemical name
admin
September 8, 2010 at 10:06 pm
HI Guys,
Thanks for the link and the good info and hope the readers will appreciate all of your comment.
Jestine
Waleed
September 9, 2010 at 2:55 am
I once worked on Cordless Drill battery charger and the whole PC was sitting in silicon and i had to scrape everything off with a sharp nife..it worked fine but like you said Justine, it takes a long time to do that. I liked what Beh suggested..and I hope to finds something like this in my home town.
demiss
September 16, 2010 at 10:11 am
jestin young please please do in our country you will be profitable our country still developing country this country is ethiopia if u want ,u can come and do.
admin
September 16, 2010 at 8:46 pm
HI Demise,
Thanks for your invitation but sorry i can't come.
Jestine
Amir Mukhtar
May 25, 2011 at 2:51 am
Sir, Jestine
I generally use and satisfied with Petrol in order to clean silicon or glue from the circuit. Sometimes when i need to wash PCB or assembled components,than i use Iso-Propile and Petrol mixture.
Thanks you
regards
Amir mukhtar
admin
May 25, 2011 at 7:07 am
HI Amir,
A very good info!
Jestine
asif
October 19, 2011 at 7:28 am
HI all, have problem with my samsung washing machine, one of the part if burnt in the control panle, which is filled with the silicone, how can i remove it, to many parts there
plz help me
admin
October 21, 2011 at 2:12 am
HI Asif,
Try this link:
http://www.valco-cp.com/solvent200.htm
Jestine
raymundo saura
November 12, 2013 at 7:20 pm
thanks sir and GOD bless
Hussain Arif
June 30, 2015 at 8:33 pm
Hi sir I want to take a book on satellite receiver repair guide.
Please sir inform me about that where from can I receive such a books?
Jestine Yong
June 30, 2015 at 10:27 pm
HI Hussain,
Sorry i do not have such title. Try search from amazon.com
Jestine
Eng MUSA NURUDEEN
October 30, 2015 at 2:32 am
and pls I have a problem with my system cq62 wen I power it on it will power,but not display.I have chake the ram and the prosessor still not displaying.pls wether i can get the solution?