Don't Miss

Meaning Of These Symbols

By on January 20, 2011

electronics symbol

I got an email that asked about the meaning of the symbols in the yellow box. It was a LED control gear that was made in China. I could not locate the meaning of these symbols. Do you know of any source for the meaning of these symbols?

Likes(4)Dislikes(3)

10 Comments

  1. Ravendra

    January 20, 2011 at 5:57 pm

    the last symbol means double insulated, earth wiring is not needed.
    second last symbol means transformer.

    i dont know the rest

    regards

    Likes(0)Dislikes(0)
  2. admin

    January 21, 2011 at 2:33 am

    Hi Ravendra,

    Thanks for sharing.

    Jestine

    Likes(0)Dislikes(0)
  3. NG

    January 22, 2011 at 10:37 am

    3.Independent lighting auxiliary
    4.Safety isolating transformer
    5.Class Ⅱ equipment or double insulated
    Repectively

    Likes(0)Dislikes(0)
  4. NG

    January 22, 2011 at 10:39 am

    I am not very sure the 2nd,but it was Monophonic if without the 80 or F inside the triagle.

    Likes(0)Dislikes(1)
  5. NG

    January 22, 2011 at 11:21 am

    It look likes
    1. F stand for Fair
    2. 80 db

    Likes(0)Dislikes(1)
  6. admin

    January 23, 2011 at 10:31 am

    HI Ng,

    Thanks for the good info.

    Jestine

    Likes(0)Dislikes(1)
  7. Amir Mukhtar

    January 28, 2011 at 1:44 am

    Respected sir
    I am less experienced but want to give answer from you permission.
    From Left to right.

    1.. Fragile
    2... Under 80 degree operated
    3... placement position
    4... Compatibility
    5... Mains Indicator

    Thanks you
    Amir

    Likes(0)Dislikes(2)
  8. admin

    January 28, 2011 at 9:45 am

    HI Amir,

    Thanks for your contribution!

    Jestine

    Likes(0)Dislikes(1)
  9. Pablo

    January 6, 2012 at 9:21 pm

    -The first one means that it is fire proof, it can be use over a flamable surface.
    -The second means a termal protection reaching 80ºC generaly in a hot spot on the surface.
    -The third means a Independent controlgear, not built in or integrated in a luminaire.
    -The fourth is a convination of 2 symbols of IEC 60417, one safety isolating controlgear and the other it`s for short-circuit proof controlgear (inherently or non-inherently)
    -The fifth is Class II equipment or double insulated

    It all come from the standar IEC 61347-2-13 for d.c or a.c supplied electronic controlgear for LED modules

    It was answered late but it could help other people perhaps

    Likes(13)Dislikes(0)
  10. beh

    January 7, 2012 at 4:25 pm

    intersting answer

    Likes(0)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close