Don't Miss

Motherboard Repair

By on June 23, 2008

 pc motherboard

I had stopped repairing PC motherboard  since i left my former computer distributor company back in 1994. Those days the famous motherboard board were the 486sx, 486dx and the Pentium. I was provided with every model of the motherboard schematic diagrams,  Chipset (all range of IC’s), SMD desoldering tools, troubleshooting notes and even the POST diagnostic card. Repairing PC motherboards on those days were quite easy but i doubt nowadays it will be easy unless you are working in the motherboard manufacturers or you have the sources for all kind information related to motherboard.

Occasionally i do have motherboard sent for repair by my friend who deal with selling computer systems. Most of the time was the electrolytic capacitors bulged and quite simple to fix it. Nowadays PC motherboard is quite cheap and less people want to repair it and prefer to buy a new board unless if the motherboard is in the higher range (branded). As mentioned, if you can’t source for the parts it would be very difficult to repair the board. Those days the boards were only using normal SMD IC’s (spider IC’s) but most of the motherboard now are using the BGA IC’s which is very difficult to extract unless you have the special equipment to do the job.

It will be very time consuming to do this precision job unless the profit that you gonna make could cover your cost otherwise it would not be economical to repair the motherboard. If any of the readers in my blog repair motherboard i would like to listen to what you have to say about motherboard repairing business-thanks 

Likes(20)Dislikes(3)

417 Comments

  1. admin

    December 1, 2010 at 10:32 am

    HI Sachee,

    It is not easy to repair motherboard if you can't find the parts. This was one of the reason i do not repair motherboard anymore because of no parts available and the new board is cheap.

    Jestine

    Likes(0)Dislikes(0)
  2. azeez

    December 2, 2010 at 5:59 am

    hi
    am a student and i will like to know much about motherboard and the functions

    Likes(0)Dislikes(0)
  3. chris

    December 3, 2010 at 8:29 am

    hey can you email me on how to clean your motherboard

    Likes(0)Dislikes(0)
  4. admin

    December 3, 2010 at 8:51 pm

    HI Chris,

    To remove the dust you can use a vacuum cleaner with a brush.

    Jestine

    Likes(0)Dislikes(0)
  5. Marulitua Hutabarat

    December 16, 2010 at 2:04 am

    Hi Mr. Jestine,
    I had a dead Manli mobo NVidia Chipset.
    If you don't mind, would you tell me what is wrong or which parts are defective.
    Thanks
    Marulitua Hutabarat

    Likes(0)Dislikes(0)
  6. admin

    December 16, 2010 at 11:03 am

    HI Marulita,

    Sorry,I no longer repairing motherboard thus i have no info on those new mobo.

    Jestine

    Likes(0)Dislikes(0)
  7. shiva

    December 18, 2010 at 4:01 pm

    i want to buy laptop motherboard repairing book which should help me to troubleshoot all kind of problems all type of laptop mother board

    Likes(0)Dislikes(0)
  8. admin

    December 19, 2010 at 12:08 am

    HI Shiva,

    Sorry i do not have laptop motherboard repairing book.

    Jestine

    Likes(0)Dislikes(0)
  9. mathesh

    December 19, 2010 at 4:19 am

    hi sir

    i have one problem i have IBM 15" AND 17" Monitor LED BLINKING AND tick tick sound Continously comes but display not working. please help me for the rectifying the problem

    Likes(0)Dislikes(0)
  10. admin

    December 20, 2010 at 6:35 am

    HI Mathesh,

    Try use this link to isolate it:

    http://www.scribd.com/doc/2957819/TT204-Identifying-television-SMPS-problems

    Jestine

    Likes(0)Dislikes(0)
  11. abdi rauuf

    December 23, 2010 at 5:47 am

    i need to get mother information

    Likes(0)Dislikes(0)
  12. admin

    December 23, 2010 at 7:36 am

    Hi Abdi,

    I suggest that you search the internet because i do not have motherboard information/ebook.

    Jestine

    Likes(0)Dislikes(0)
  13. Daniel

    December 23, 2010 at 8:14 pm

    hi.have you got laptop chiplevel motherboard repair book?how much cost if you've got?regards .daniel

    Likes(0)Dislikes(0)
  14. admin

    December 23, 2010 at 11:10 pm

    Hi Daniel,

    Sorry i do not have laptop repair ebook.

    Jestine

    Likes(0)Dislikes(0)
  15. NAVIN

    January 2, 2011 at 10:25 am

    how to motherboard repair and asambling

    Likes(0)Dislikes(0)
  16. Raya Dipraja

    January 12, 2011 at 3:21 am

    Thank Mr Keven for suport

    Likes(0)Dislikes(0)
  17. vicky

    January 18, 2011 at 6:09 am

    what price the books

    Likes(0)Dislikes(0)
  18. admin

    January 18, 2011 at 9:15 am

    HI Vicky,

    Sorry i do not have motherboard repair ebook.

    Jestine

    Likes(0)Dislikes(0)
  19. alisha

    February 4, 2011 at 5:18 am

    Apart changing the buldged capacitors, cleaning the mainboard due to rust etc, loose connection and dry joints there is not much can be done on the mainboard unless you really have the parts (ICs) for replacement.

    Likes(0)Dislikes(0)
  20. admin

    February 4, 2011 at 11:22 am

    Hi Alisha,

    Yes you are right.

    Jestine

    Likes(0)Dislikes(0)
  21. Timmiokopoff

    March 7, 2011 at 2:28 am

    Hi there.
    I have lots of laptop motherboards that not support video or power. What books would you recommend to me, so i can learn how to figure out the problem and fix it. And would you mind to give me list of a tools that i would need for that.
    Thank you.

    Likes(0)Dislikes(0)
  22. Yan

    March 8, 2011 at 3:16 am

    Hi there. I have a Acer Aspire 5520-5277 that will not power up at all. Only the power LED blinks.(3 secs on, 2 off, 3 on, then rapidly for ever) I am most likely going to trash the Mobo, as all the components are working fine (tested in another unit individually) Batterys good, Charger is good. . Ive scoured the net trying to find somewhere i can get a schematic or info on where to look on the board itself for the issue, but no luck. I seen your ad on Ebay and looks like you guys know your stuff. I don't have money to spend on getting it repaired or a new laptop for that fact. I repair electronics for a hobby, and a Mobo is new to me, but am confident enough to get into it. Would you be willing to give out some advice or solution or help LOL 🙂 If you need any more info from me, please don't hesitate to ask. Thanks for your time, Yan Svenson

    Likes(0)Dislikes(0)
  23. admin

    March 8, 2011 at 5:15 am

    HI Tim,

    Sorry i do not have book on laptop motherboard repair thus i can't recommend any book for you. As for the tool, you need smd rework station, scope and also smart tweezer and you can get one from http://www.advancedevices.com

    Jestine

    Likes(0)Dislikes(0)
  24. pramod

    March 8, 2011 at 5:36 am

    hi sir i interest repairing motherboard

    Likes(0)Dislikes(0)
  25. sosanya adebayo

    March 8, 2011 at 6:49 am

    i want to lean how to work on motherboard

    Likes(0)Dislikes(0)
  26. Pramod Madhusudhanan

    March 9, 2011 at 10:38 am

    Dear sir
    I am a hardware student i would like to know how we troubleshoot a motherboard.And wht is the use of cnr slot on the motherboard
    thank you

    Likes(0)Dislikes(0)
  27. admin

    March 9, 2011 at 10:51 am

    HI Yan,

    May i know which ebay page that you saw the ad because as far as i know i did not advertise in ebay. For your information, I had stopped repairing motherboard long time ago thus I'm unable to give any advice on this-sorry.

    Jestine

    Likes(0)Dislikes(0)
  28. admin

    March 9, 2011 at 11:43 pm

    HI Pramod,

    It depends on the problem of the motherboard in order to troubleshoot it. Communications and Network Riser (CNR) is a interface on a computer motherboard for interfacing a communication device or peripheral.

    Jestine

    Likes(0)Dislikes(0)
  29. Victor Musungu

    March 10, 2011 at 9:09 am

    Sincearly motherboard repairing is very hard instead i only prefer buying another new motherboard. it will be a waste of time because the new ones are non repairable.

    Likes(0)Dislikes(0)
  30. admin

    March 10, 2011 at 11:04 pm

    Hi Victor,

    You have your point because getting the spare parts is very difficult.

    Jestine

    Likes(0)Dislikes(0)
  31. althaf

    March 11, 2011 at 5:07 am

    my front speaker doesnot work.... so i just opened my cpu,and found open wires.. can u please help me, where to connect the following wires..

    MIC IN
    MIC BIAS
    SPK OUT L
    SPK OUT R
    RETURN L
    RETURN R
    GROUND

    Likes(0)Dislikes(0)
  32. admin

    March 13, 2011 at 4:15 am

    HI Althaf,

    Try this link:

    http://quicktech.us/Computerconnections.html

    Jestine

    Likes(0)Dislikes(0)
  33. raj

    March 13, 2011 at 12:25 pm

    Can u teach me some basics on motherboard repairing?

    Likes(0)Dislikes(0)
  34. praise

    March 13, 2011 at 6:07 pm

    gud day sir i like this program and am very much intrested in knowiog more about m.b of a systm unit

    Likes(0)Dislikes(0)
  35. admin

    March 14, 2011 at 11:24 pm

    HI Praise and Raj,

    Sorry i do not have the motherboard repair program.

    Jestine

    Likes(0)Dislikes(0)
  36. sami

    March 18, 2011 at 2:21 am

    i want to chip-level e-book

    Likes(0)Dislikes(0)
  37. admin

    March 18, 2011 at 4:49 am

    Hi Sami,

    Sorry i do not have chip level repair ebook.

    Jestine

    Likes(0)Dislikes(0)
  38. Prince Darlinton

    March 23, 2011 at 11:25 am

    Hi Mr. Jestine.... I am also taking this course but the problem is mterials how can I get throuh on that.

    Likes(0)Dislikes(0)
  39. priyanka

    March 24, 2011 at 2:49 am

    for chip level repairing books , check http://www.chiptroniks.com

    Likes(0)Dislikes(0)
  40. vigneshwarrao.m

    March 24, 2011 at 3:22 am

    hello, i am vignesh i am a student in diploma in computer engineefing i like to download the document regarding the pc hardware and chiplevel service.

    Likes(0)Dislikes(0)
  41. admin

    March 24, 2011 at 9:16 am

    HI Prince,

    Sorry i do not have the motherboard repair material.

    Jestine

    Likes(0)Dislikes(0)
  42. admin

    March 24, 2011 at 9:17 am

    HI Vignes,

    Sorry i do not have those info.

    Jestine

    Likes(0)Dislikes(0)
  43. balbino p. hongoy jr

    March 24, 2011 at 11:25 am

    Dear: sir
    thank you for your website I am willing to apply your company as a computer rapair

    Likes(0)Dislikes(0)
  44. EMAD AHMED

    March 27, 2011 at 1:55 pm

    Dear Sir

    we have an surveying instrument brand Leica model TC 1105 total station

    the main motherboard and the electonic distance mesuerments board is not working

    can you repair it ? what is the cost .

    thanks
    b/rgs
    Emad

    Likes(0)Dislikes(0)
  45. admin

    March 28, 2011 at 5:49 am

    HI Emad,

    Sorry we do not repair test instrument. I suggest that you send it back to the supplier because they have the parts.

    Jestine

    Likes(0)Dislikes(0)
  46. techguru24

    March 30, 2011 at 11:12 am

    hi sir i am harish shriwas . i want to dewlop my carrer in motherbord reparing

    Likes(0)Dislikes(0)
  47. admin

    March 31, 2011 at 6:19 am

    HI Harish,

    Good to hear that and you need to work hard to achieve your dream.

    Jestine

    Likes(0)Dislikes(0)
  48. Ram bahadur thapa

    April 4, 2011 at 1:23 am

    hello sir how are u i hope u are well and iam thinking about doing bussiness about repairing lcd moniter, tv, and other electronic repairing system i thing u will help me in this situtation and i need the book i want to get knowledge how can i get the knowledge

    Likes(0)Dislikes(0)
  49. admin

    April 4, 2011 at 3:01 pm

    Hi Ram,

    Nice to hear about your plan-which ebook do you need?

    Jestine

    Likes(0)Dislikes(0)
  50. Esosa Hanson

    April 15, 2011 at 4:39 am

    What's the main function of a mother board..And it importance....Thanks

    Likes(0)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close