Latest News

• 
  Gate Controller Board With A Nasty Burn Repaired Using Soldering Mask

            A guy next door brought me a gate controller for repair. the guy explained that the board has a nasty burn and a very...

  • April 8, 2023
  • 6
• 
  Completed Another Basic Electronics Repair Level 1 Course

  Completed today another Basic Electronics Repair Level 1 Course for 3 participants. Below are some photos taken during the 3 days course: Likes(4)Dislikes(0)

  • April 7, 2023
  • 2
• 
  Four HAVELLS Electronic Fan Regulators Brought Back To Life

              Four of these regulators were brought to me by my schoolmate with the complaint that all of them worked only at full speeds...

  • April 1, 2023
  • 12
• 
  A Dead Security Camera Was Brought Back To Life

  A guy brought this camera for repair and he explained that the camera powers up on a USB charger and sometimes the camera powers on but most of the...

  • April 1, 2023
  • 10
• 
  A Broken Fan On A Dirty Welding Machine Replaced. Model: Mini 250H

  One of my regular customers brought me this welding machine for repair. The customer explained that the welding machine works fine but it goes into shut down on hot...

  • April 1, 2023
  • 8
• 
  Overhauling Mechanism Of Harman/Kardon Cassette Deck HK300XM

            This was brought to me by a regular customer friend with the complaint that tape did not work and there were intermittent output problems...

  • April 1, 2023
  • 6
• 
  Shorted Battery Chargers Repaired And Maintained

                These two battery chargers were brought to my shop for repair. The customer explained that these two exploded on site as an...

  • March 24, 2023
  • 11
• 
  Fixing Universal Board In SHARP LED TV LC24E156M

            This is yet another case that I had the chance to attend to during my periodical visits to my techie friend who focused on...

  • March 24, 2023
  • 8