Don't Miss
Repairing the FS-R6B Rx
By Jestine Yong on May 20, 2014
One of my blog readers Mr Santhosh from India had written an article on repairing the FS-R6B Rx. Please click on the photo below to read the article.
Likes
(9)Dislikes
(2)
(9)Dislikes(2)
6 Comments
Leave a Reply
Suraj Shinde
August 30, 2016 at 11:10 pm
Sir plz help me. I have also fs-r6b . When i on the transmitter and receiver , i connected all pins to the kk 2.1.5 so the problem is that , when i switch on both the rx tx, in receiver test in the kk 2.1.5 the
Throttle ,the yaw ,the rudder, the aux all values changing automatically and suddenly or continously .
So where is the problem . Plz help me . And sorry for my rough english
Suraj Shinde
August 30, 2016 at 11:13 pm
I tested the receiver without kk 2.1.5
And i connected a motor . Problem also coming.
Motor automatically moving , fast, slow .
Sir plz i request u , plz help me . I am waiting for ur reply
Farooque
March 15, 2018 at 11:52 pm
My receiver led not blinking because of a yellow component berned
I can't realize that model number or corde
plz help me
https://goo.gl/images/UtM27H
Ranjit
July 17, 2020 at 11:28 am
Sir my R6b receiver get only 50 meter range solution plz
scott
February 23, 2022 at 10:17 pm
SIR my receiver fs r6b dont switch on when i connnect the power wire it only blink once and stops - can you please help me with the solution or any one if knows please
Utsav Kaushik
March 23, 2022 at 6:09 pm
Sir the blinker in my receiver works just fine and so does the transmitter but they won't bind.
I do everything according to proper steps but it won't bind.
Where could the fault be sir?
Please help