Hi Jestine
I have sharp vcr midel vc 790 ET multi system I t was using it to transfer pal vhs tapes to dvds.
Now when I insert the tape it go down stay there few seconds and come back it does like this few times and than stops. Also the head id not turning ON too.
I think it is not detecting the the tape. I opened the tape carrier and checked all the micro switches are fine. There is small cct board in the bottom where the Tape sits and run i think this is for to detect the tape and also i checked the sensor embedded inthe small plastic stand which is also used to unlock spools. Sensor shows resistance. I also tried different tapes but still the problem is there. Would you please like me to suggest some thing help me to solve my problem.
Nasim
April 26, 2020 at 12:39 am
Hi Jestine
I have sharp vcr midel vc 790 ET multi system I t was using it to transfer pal vhs tapes to dvds.
Now when I insert the tape it go down stay there few seconds and come back it does like this few times and than stops. Also the head id not turning ON too.
I think it is not detecting the the tape. I opened the tape carrier and checked all the micro switches are fine. There is small cct board in the bottom where the Tape sits and run i think this is for to detect the tape and also i checked the sensor embedded inthe small plastic stand which is also used to unlock spools. Sensor shows resistance. I also tried different tapes but still the problem is there. Would you please like me to suggest some thing help me to solve my problem.
Nasim
Jestine Yong
April 29, 2020 at 6:12 pm
Hi Nasim,
If your problem is auto eject perhaps check on the youtube link here to get some ideas.
Jestine