Don't Miss

New Repair Blog

By on June 23, 2009

A repair friend of mine John Preher had started a blog about electronic repair. Feel free to visit his website by clicking on the photo and in his blog he do mentioned about a new ESR and flyback tester from Russia in one of the post.

john preher

Likes(1)Dislikes(0)

22 Comments

  1. john preher

    June 25, 2009 at 7:23 am

    Hello Jestine, Thanks for posting about my new Blog.I will be trying to update atleast 5 times a week.About the meters from Russia,when I get the new ESR meter and ring tester i will let you all know how well they work and how nicely manufactured they are.

    Likes(0)Dislikes(0)
  2. admin

    June 25, 2009 at 7:11 pm

    Hi John,
    Okay will hear from your feedback.

    Jestine

    Likes(0)Dislikes(0)
  3. John Preher

    August 14, 2009 at 9:21 am

    My Blog has been going very good and I enjoy doing it though I have few followers so far. It still generates hits for my website. Also I have now received the Russian ESR-micro and I really like this device.

    Likes(0)Dislikes(0)
  4. admin

    August 14, 2009 at 9:39 pm

    HI John,

    Congratulation! By the way is thie new ESR have any similarity with the Atlas ESR?

    Jestine

    Likes(0)Dislikes(0)
  5. John Preher

    August 15, 2009 at 11:03 am

    thanks, and yes the esr-micro does have some similarities with the Atlas ESR only the esr-micro has a ESR range of 0-100 ohms and a capacitance range of 1-60,000uF. I have been using the esr-micro a lot and I really like it so far.

    Likes(0)Dislikes(0)
  6. jesse

    February 15, 2011 at 1:39 am

    enjoyed reading your blog and was wondering if you had any idea why a 42 inch philips would go black screen and make a chirping noise when powered on?

    Likes(0)Dislikes(0)
  7. admin

    February 15, 2011 at 8:11 am

    HI Jesse,

    If you are referring to LCD TV then you may need to check if there is supply voltage to the inverter board. One of the backlight have problem could cause the display to shutdown. Make sure also the power supply is producing good and stable output voltages.

    Jestine

    Likes(0)Dislikes(0)
  8. pendy

    March 29, 2011 at 2:38 pm

    Hi Jestine,

    I have a problem with switch mode power supply,the mosfet was shocked.The part number is STP3NB60FP,WGR42.
    Do you have any suggestion where can I get the spare part especially in Malaysia,or can replace it other spare parts?

    Likes(0)Dislikes(0)
  9. admin

    March 30, 2011 at 7:39 am

    HI Pendy,

    Sorry no info on the local supplier-try this link:

    http://www.utsource.net/STP3NB60FP.html

    Jestine

    Likes(0)Dislikes(0)
  10. inder

    January 14, 2012 at 11:47 am

    hi jestine ,there is a problem with my atx smps, whan i short the green and black wire the fan move once and stopped i've checked almost every component.so pls tell me what should i do.

    Likes(0)Dislikes(0)
  11. admin

    January 15, 2012 at 2:57 pm

    HI Inder,

    Did you connect to the motherboard and turn it on? Try check the filter cap in the output section with ESR meter.

    Jestine

    Likes(0)Dislikes(0)
  12. inder

    May 8, 2012 at 7:11 am

    hi jestine ,there is a problem with my dewoo TV  after running sometime the screen turns off automaticly.and the sound is still remains. what should i test. 

    Likes(0)Dislikes(0)
    • Jestine Yong

      May 8, 2012 at 8:30 am

      Hi Inder,

      CRT or LCD TV?

      Jestine

      Likes(0)Dislikes(0)
  13. inder

    May 9, 2012 at 2:56 am

    It is a CRT TV ...

    Likes(0)Dislikes(0)
    • Jestine Yong

      May 9, 2012 at 4:48 am

      HI Inder,

      Screen turn off can be the high voltage shutdown or the G2/HEATER VOltage not present. Could You confirm if the TV still have high voltage once the screen is dark? You can confirm this if the tv still pulling the hair of your hand after shutdown.

      Jestine

      Likes(0)Dislikes(0)
  14. inder

    May 10, 2012 at 6:35 am

    no after shutdown it dosn't  pull  my hair .but someday it play contineusly  whole day. and sometime not even half an hour..

    Likes(0)Dislikes(0)
    • Jestine Yong

      May 11, 2012 at 12:56 am

      Hi Inder,
      It could be dry joints. Try gently tap the board with the handle of screw driver to see if there is any changes. What is the B+ voltage to flyback before it shutdown?

      Jestine

      Likes(0)Dislikes(0)
  15. inder

    November 15, 2012 at 12:22 am

    hi jestine how are you.i have a problem with samsung lcd, it takes about 20 minute to display.whan i turn on just shows a black screen and blinking blue led and as i said it takes about 20 minute to display.this lcd attached with my computer.

    Likes(0)Dislikes(0)
    • Jestine Yong

      November 15, 2012 at 6:33 am

      HI Inder,

      Try open up the cover and check for bulged filter capacitors.

      Jestine

      Likes(0)Dislikes(0)
  16. inder

    November 17, 2012 at 1:03 am

    hi jestine i found two bulged filter capacitor and i replaced them.now the lcd working fine.thankyou very much.

    Likes(0)Dislikes(0)
    • Jestine Yong

      November 17, 2012 at 9:40 am

      HI Inder,

      You are welcome!

      Jestine

      Likes(0)Dislikes(0)
  17. francis machika

    April 12, 2019 at 10:51 pm

    thank you for fast respond i rewind switch transform,its has 80 turns 40 - 40 turns and in primary and in secondary we have 4 40 turn,but when i replace this transformer it bust.how to measure the size of wire?

    Likes(0)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close