Don't Miss

Replacement Part For K10A60D

By Jestine Yong on September 12, 2013

Customer brought me a 32″ Sony’ LCD TV for repair. The problem was no power. I checked the power board and found main fuse and FET transistor were bad. The part number of the FET transistor was K10A60D.

I tried to find in local shop but I could not find the same part number. So I tried with different part number and it was working fine. I replaced K10A60D with K2645.

By Kelum Sanjeewa

Likes

(27)Dislikes

(8)

8 Comments

Mohammed Kasim C M

September 12, 2013 at 10:36 pm

what you mean by regulator transistor?

Likes(2)Dislikes(1)

Reply
- Jestine Yong
  
  September 13, 2013 at 9:33 pm
  
  HI Mohammed,
  
  It should be FET transistor. I have amended it.
  
  Jestine
  
  Likes(1)Dislikes(0)
  
  Reply
- Magnet
  
  March 22, 2018 at 6:38 pm
  
  Hi...My power supply 40inch Samsung is dead,all to found out K10A60w is dead,It is possible to replace with wich transistor? Samsung 32inch transistor?
  
  Likes(30)Dislikes(2)
  
  Reply
Amir Mukhtar

September 13, 2013 at 3:49 am

Sir,

thanks you for Share substitute component guide.

thanks you
Amir mukhtar Ashrafi

Likes(1)Dislikes(0)

Reply
permie

December 28, 2013 at 10:24 pm

Thanks a lot man . I did it as well on my Sansui 42" plasma .Two of those transistors were dead on the inveter board and couldn't find them either.I used those alternatives ones because they are available .KEEP UP THE GOOD JOB MAN .

Likes(3)Dislikes(0)

Reply
Awie

January 23, 2019 at 5:46 pm

Hi..may i change k10a60d to kf8n60.

Likes(1)Dislikes(0)

Reply
- SERGIO RODRIGUEZ
  
  March 10, 2019 at 8:19 am
  
  no
  
  Likes(1)Dislikes(0)
  
  Reply
Joe cheong

August 22, 2019 at 1:52 am

Hello!!.My Samsung 40inch power supply board is dead, all to found out K10A60w is dead,I can change k10a60w to k10a60d?

Likes(2)Dislikes(0)

Reply