Repair World-Electronic Repair Information Website

Currently this private repair newsgroups (providing solution database) have over over 5,300 members, cover many service topics, including computer, monitor, TV, satellite, camcorder, VCR, audio, and much more. There are many free electronic repair forum in the internet, however if you feel that you need more assistant or help to increase your repair knowledge, just join and test for a month. If it is good , you can remain to be their member and of course you need to pay them monthly. For more information you may visit the website now.

Likes(0)Dislikes(0)

6 Comments

1. 

   sahir bin mohd ejun

   July 10, 2007 at 2:27 pm

   thanks a lot justine,
   i like electronic repair because we cannot see the faults.
   if we can repair it, it is very interesting.... don't know to say..

   i got one problem (monitor dell) that power cannot start, giving chirping noise, until now i cannot solve it, can u help me to give the tips....
   almost all the component i check , all look ok.......

   Likes(0)Dislikes(0)

   Reply
2. 

   admin

   July 10, 2007 at 8:34 pm

   Hi Sahir,
   There are many problems that can cause chirping noise, have you check all these components:

   primary winding of flyback transformer
   horizontal yoke coil winding
   a shorted internal capacitor in flyback transformer
   all the esr caps at the secondary side
   shorted B+ coil

   Could you please specify what are the components that you had checked?

   Likes(0)Dislikes(0)

   Reply
3. 

   Dex

   February 9, 2009 at 2:56 pm

   i like electronics very much but i just do not know how to go about it .Can you send me any notes(material) on electronic repairs

   Likes(0)Dislikes(0)

   Reply
4. 

   admin

   February 9, 2009 at 10:33 pm

   Hi Dex,
   You can sign up here http://www.electronicrepairguide.com/electronic-repair-newsletter.html to get the repair notes.

   Jestine

   Likes(0)Dislikes(0)

   Reply
5. 

   charlesnortey

   June 27, 2009 at 11:42 pm

   I need help, my tv set has a vertical line. what shall I do.

   Likes(0)Dislikes(0)

   Reply
6. 

   admin

   June 28, 2009 at 10:59 pm

   Hi Charles,
   If it is vertical line then you have to check the horizontal section. Check for dry joint nearby flyback area and also the crt yoke coil connector area. Make sure that the horizontal yoke coil have resistance when test with ohmmeter. Hope this helps!

   Jestine

   Likes(0)Dislikes(0)

   Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.