All posts by Jestine Yong
-
Without the Right Tools It is Difficult To Fix Equipment
This BG 32″ LED TV with the model 32E38 came in for repair with the complaint of display screen problem-see the above picture. Screen problem usually caused by defective T-con board, bad LCD panel and the FPC...
- Posted February 22, 2021
-
Bulgy Capacitors Found In Enhance Model Computer SMPS
This Computer SMPS was once again from the hospital where I work. The complaint was no output. Opened and cleaned the SMPS thoroughly using blower and various brushes....
- Posted February 16, 2021
-
Open Circuit in SMD Resistor
Customer sent to me this Telesonic FM Radio with the complaint of no power and cannot be charged. After opening up the cover I went straight to the power and charging...
- Posted February 16, 2021
-
Mosquito Killer Racket Repaired For Low Sparking
Another racket repaired for above stated problem. When press the button and touch the net it gives very low spark that means no sufficient power is present on the net. Because of low killing power mosquitoes are...
- Posted February 16, 2021
-
Bulged Caps And Bad SMD PWM Found In Two Dead LG 12v Adapters
These two AC Adapters belong to the hospital where I work. (By the way, I have resumed my visits every alternative day, after doing online support from house for the...
- Posted February 9, 2021
-
9W LED Bulb Repaired
In our house in the night time I am using this 9W led Bulb for reading purpose. Once I have light up the Bulb it lit up for half an hour...
- Posted February 9, 2021
-
Missing Component In TV Repaired
This Singer CRT TV came in for repair with the complaint of Standby light On. For your information Standby light problem can be caused by improper output DC from the power supply, corrupted memory ICs, no high...
- Posted February 9, 2021
-
Dell Laptop Misbehavior on Booting Repaired
One of my old customers referred his friend to me for his laptop problem he has stating the problem as laptop is misbehaving intermittent due to virus infection. As per...
- Posted February 3, 2021












