All posts by Jestine Yong

• 
  Standby LED Blinks In Haier LED TV Repaired

  The complaint of this Haier 24″ LED TV was standby LED  light blinking. For your information standby LED light blinking problem can be caused by bad power supply output voltage, bad voltage regulator IC in the mainboard...

  • Posted December 4, 2020
  • 9
• 
  Lenovo Laptop Adapter Repaired For Not Charging Problem

                    Customer has delivered this laptop charger for repair. Stating problem as above. On arrival I did voltage testing on Dc output Pin it shows 2.3V DC instead of...

  • Posted December 4, 2020
  • 13
• 
  No Display With Burnt Smell and Noise From a 21″ CRT TV Fixed

  Customer sent to me a 21″ Philips CRT TV with the complaint of no display but have power. Once I turned the set On I could smell something burning inside and with noise also. I suspected it...

  • Posted December 4, 2020
  • 11
• 
  Standby Problem In Singer DVD Player Repaired

              This Singer DVD player was sent to me for repair with the complaint of standby and after that went into “Off” mode. See the photo below: Standby mode can be due...

  • Posted November 30, 2020
  • 6
• 
  Small Width In Hitachi CRT TV

          Customer sent to me this 21″ Hitachi with the complaint of small width display (squeezed display at both left and right side)….see the above photo. For your information, if the display width is...

  • Posted November 30, 2020
  • 4
• 
  AC DC Adapter Cell Phone Wall Charger Repaired

                This AC DC DC Adapter Cell Phone Wall Charger with no brand and model SM-600B was brought to me by a fellow-worker and the complaint was his Cell Phone was...

  • Posted November 30, 2020
  • 14
• 
  LG 32″ LED TV No Backlight Repaired

                    This 32″ LED TV came in with the complaint of no backlight but have sound. The power LED light was also normal. Could see both the power and...

  • Posted November 25, 2020
  • 8
• 
  Professional Clipper Went Back to Life

                  This Professional Clipper was brought to me due to it was fully dead. It was brand DAYTRON and Model DAYT – B025 First thing done was to disarm the...

  • Posted November 25, 2020
  • 4