All posts by Jestine Yong
-
A Microwave Oven With Heat Issue Repaired And MaintainedA customer walked into my shop carrying this microwave oven and he said that it was not heating up and he suggested that I replace the magnetron. It was very interesting to...
- Posted April 12, 2025
-
Revisit Of A Thomson Three-In-One Model VTM2400 After Nine YearsThis set, which belonged to a Famous Film Director and renowned artist, had visited me in September, 2015 for the same problem, i.e., the turntable does not turn. I had replaced the belt...
- Posted April 12, 2025
-
Portronics Dash 12 Portable Speakers Repaired- Part 2Checked Voltages ON Charging IC here also voltages are fluctuating. I found battery out voltage on pin no.5 is fluctuating between 1.8v to 4.8v. so I suspected Charging IC Here. But what about...
- Posted April 6, 2025
-
Portronics Dash 12 Portable Speakers Repaired- Part 1Received party speakers, stating problem it suddenly stopped working assuming the Battery drained they kept for charging for 1 whole day still it does not power ON. For confirming stated problem...
- Posted April 6, 2025
-
A Bizzare Way Of Opening Garden LED Flood Light Model ECOLINKThis belonged to the hospital where I work and was brought to me in dead condition hoping to get it rectified. I openedthe four screws, which housed the LED driver module...
- Posted April 6, 2025
-
A TV With A Bad USB Input Repaired And MaintainedMy sister in law from the school that my son goes to gave me a call and asked me if I can stop by the school any time soon. In my...
- Posted April 6, 2025
-
Backlight LED Domes Found Lying Loose In SONY LED TV Model KLV32EX330This was referred to by a customer who had his emergency light and torches repaired by me in 2018. The TV was in use by two super senior citizens whose entertainment was...
- Posted March 29, 2025
-
How To Fix A Dead Short Welding MachineA welding technician brought his dead welding machine for repair. It was completely dead; no life whatsoever. The first step was to test the main power coming to the machine so...
- Posted March 29, 2025
