All posts by Jestine Yong

• 
  Fixed A Broken BPL-SANYO Vacuum Cleaner

              MAKE AND MODEL: BPL-Sanyo Vacuum Cleaner model BSC2002 COMPLAINT: Dropped from a height of about 6 feet and the cabinet case broken inside and outside. HISTORY: This is a Vacuum Cleaner...

  • Posted June 5, 2020
  • 10
• 
  A Dead Xbox Power Supply Brought Back To Life

                    A friend of mine called me and asked if I was in the shop. We were under lock down at that time. He wanted me to fix his...

  • Posted June 5, 2020
  • 11
• 
  No Power In Singer LCD TV Repaired

                  This Singer LCD TV 32 Inch came in for repair with the complaint of no power. My initial though was probably the main fuse was gone, together with some...

  • Posted June 2, 2020
  • 13
• 
  Two Resistors Found Open In 5V 3A AC-DC Power Adapter

                  Model and Make: Nagano 5V 3A AC Adapter Model SQ15W5P-11 Problem reported: Dead Observation: A lot of dry solder. Fuse was intact. TL431 SMD in the secondary side was...

  • Posted June 2, 2020
  • 14
• 
  Three Bad Components Found In Power Adapter

                  Power supply repair and a good lesson to learn A customer who owns a store nearby brought a power supply for repair. There was no sign of life in...

  • Posted June 2, 2020
  • 9
• 
  Shorted Transistors In Active Sound Speakers

  A speaker that was sitting in my shop for almost 45 days. I was not able to get to my shop due to the spread of the Covid 19 virus because everything was on lock down. Now...

  • Posted May 29, 2020
  • 9
• 
  No Sound In Telesonic RCR Repaired

              The complaint from my customer about this Telesonic RCR Radio was no sound. I took out my USB (below photo) and plugged it in and it can played but there was...

  • Posted May 29, 2020
  • 5
• 
  Treadmill with Error 2 Repaired. Model: York Blazer 4090

  A taxi driver, also a friend of mine called me during lock down (because of Covid 19) and asked me if I can work on his treadmill at home. I told him, if he can bring it...

  • Posted May 29, 2020
  • 9