All posts by Jestine Yong
-
Homemade Isolation Transformer
I have always wanted a second isolation transformer. I had some spare parts lying around and an old Atx power supply case. Using these parts I built my own. This one can...
- Posted August 17, 2024
-
LG Home Theater As No Audio
A new customer came to my workshop with this home theater with complaint of playing but no sound. So i did the usual and probe through the device, nothing to suspect. So...
- Posted August 17, 2024
-
Manicure Pedicure Rotary Tool Repaired
Received Manicure Pedicure Rotary Tool Repair stating speed was not controlling. So for further inspection I dismantled the unit. Visual inspection I found IC AMS1117 & nearby capacitor were dry solder. Removed IC & Capacitor. Cleaned solder...
- Posted August 17, 2024
-
Completed Another Advanced Electronics Repair Level 2 Class
Completed today another Advanced Electronics Repair Level 2 Course for 6 participants. Three of the participants were from Infineon Technologies. Below are the photos taken during the 3 days course: Likes(20)Dislikes(0)
- Posted August 16, 2024
-
How To Build A Dummy Load For ATX Power Supply Testing
Here is a simple dummy load you can build for testing ATX computer power supplies. All you need is the following items. Two 12 volt automotive light bulbs. One male...
- Posted August 10, 2024
-
SONY CYBER Shot Battery Charger Repaired
I took out my Sony Cyber Shot camera for some use but found Battery was totally drained. So attached on charger but it is not showing any charging indication. It...
- Posted August 10, 2024
-
IGBT Found Blown In This PRESTIGE Induction Cooker Model PIC 29.0
This induction cooker along with a cloth iron was brought by a new customer, as per recommendation of one of my friends. He told me that the Induction Cooker (hereinafter referred to...
- Posted August 10, 2024
-
Gecko Got Fried In This Havells Cloth Iron
This cloth iron was brought to me by a new customer, recommended by one of my friends. He said that this was left unused for a long time and one day...
- Posted August 10, 2024