Don't Miss

All posts by Jestine Yong

  • Taking A Break To Cameron Highlands

    Tomorrow morning, I will be going to Cameron Highlands for  3 days with my family. In fact I already went to this place last year during the school holiday break. We love to visit this place because...

    • Posted August 26, 2009
    • 6
  • All About SMD Related Products

    If you wish to get SMD tools, rework station, flux and etc then head right to this website as this website have all the SMD related things that you need. Please click on the photo to visit...

    • Posted August 25, 2009
    • 2
  • Electronics 2000 Website

    If you are new to electronics i guess this website would be suitable for you. It was recommended by one of the blog reader and please click on the photo to view the website. Remember to check...

    • Posted August 24, 2009
    • 2
  • Electronic Repair Questions/Answers And Testimonials- Part 38

        Hi Justin: I really enjoy reading your book over weekend. your book is really straight to the point. I hope in the future if you will write more books on how to read schematic and troubshooting. Also how to use and set up...

    • Posted August 23, 2009
    • 6
  • Is It Enough To Have Good Meters?

    Of course the more meters you have the better or faster to locate a problem. Now besides meters, having the right schematic diagram and understanding how each section in an equipment work is equally important. Even though...

    • Posted August 22, 2009
    • 4
  • An Interesting Repair Question

    Got an interesting question today posted by Dennis: “What is the best fault finding method to find a short circuit in a electronic circuit?” regards Dennis J And here is my answer to him: Hi Dennis, There...

    • Posted August 21, 2009
    • 2
  • Installing SMD Components

    Likes(1)Dislikes(0)

    • Posted August 20, 2009
    • 2
  • Completed The Basic Electronic Course

    I found that my house internet line was good after reaching home otherwise i would have to postpone it again of writing blog post. I guess it could be the port problem and not my modem problem....

    • Posted August 19, 2009
    • 2
Open

Close