Completed Another MicroElectronics Repair Course Level 4

Just completed another Microelectronics Troubleshooting and Repair and Microsoldering Course for 3 participants. Below is a video and photos taken during the 3 days course:

Likes(17)Dislikes(0)

11 Comments

1. 

   Parasuraman S

   October 22, 2022 at 9:04 am

   Congratulations and all the very best always!

   Likes(0)Dislikes(0)

   Reply
   • 

     Jestine Yong

     October 22, 2022 at 11:53 am

     Hi Parasuraman,

     Thanks.

     Jestine

     Likes(0)Dislikes(0)

     Reply
2. 

   Tayo

   October 22, 2022 at 12:35 pm

   Well dont and congrats to the grads!
   Eventually everyone will need a microscope to work on these new devices!

   Likes(0)Dislikes(0)

   Reply
   • 

     Jestine Yong

     October 22, 2022 at 2:44 pm

     Hi Tayo,
     Thanks!

     Jestine

     Likes(0)Dislikes(0)

     Reply
3. 

   Albert van Bemmelen

   October 22, 2022 at 6:24 pm

   Congratulations guys! Well done!
   PS: Just watched the new video. The video plays fine but with a rather disturbing loud noise produced by all fans and blowers in the training room filled with activity. Noise levels that I kind of remember from my visits to my dentist (lol).
   Probably not exactly comforting for the ears during those 3 long days of training. Or the recording level of your camera was set too high, Jestine?

   Likes(2)Dislikes(0)

   Reply
   • 

     Jestine Yong

     October 23, 2022 at 7:53 am

     Hi Albert,

     Thanks. The sound was from two small powerful ventilator fans. It will be only turned On when students doing the soldering/rework/reflow of ICs otherwise it will be turned off. It is not On all the time. There is another bigger ventilator fan (less noise) installed at the corner of the room will be On all the time. Health safety is utmost priority in my class.

     Jestine

     Jestine

     Likes(2)Dislikes(0)

     Reply
     • 

       Albert van Bemmelen

       October 23, 2022 at 4:10 pm

       Understood! Good to hear (lol)!

       Likes(0)Dislikes(0)

       Reply
4. 

   Yogesh Panchal

   October 25, 2022 at 2:29 am

   Good to see work using Microscope...Now in coming days, it is impossible to repair the devices without the Microscope.

   Likes(0)Dislikes(0)

   Reply
   • 

     Jestine Yong

     October 25, 2022 at 10:28 am

     Hi Yogesh,
     Thanks. You are right about the Microscope. It is impossible to repair those tiny circuits without using Microscope.

     Jestine

     Likes(0)Dislikes(0)

     Reply
5. 

   Lazarus

   October 25, 2022 at 8:24 am

   Big job and thanks.

   Likes(0)Dislikes(0)

   Reply
   • 

     Jestine Yong

     October 25, 2022 at 10:27 am

     Hi Lazarus,

     Thanks.

     Jestine

     Likes(0)Dislikes(0)

     Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.