Don't Miss

Completed MicroElectronics Troubleshooting and MicroSoldering Course

By on April 29, 2022
microelectronics repair course

Just completed today my latest repair course on MicroElectronics Troubleshooting and Repair and Micro-Soldering for 2 repair engineers from the Northern region (semiconductor factory). For more info about this course you can check out the website here. Below is a video and photos taken during the 3 days course:

microelectronics repair course

how to repair iphone course

how to repair smart phone course

iphone repair course malaysia

smartphone repair course Malaysia

microelectronics repair course Malaysia

Likes(20)Dislikes(0)

10 Comments

  1. Babu M S

    April 30, 2022 at 1:08 am

    Sir,
    May please write a article about the MicroElectronics Trouble shooting and microsoldering to acquire some knowledge. My best wishes for the participants who all are completed the course.

    Likes(1)Dislikes(0)
    • Jestine Yong

      April 30, 2022 at 4:37 pm

      Hi Babu,

      No plans yet at current moment to write articles on this subject.

      Thanks.

      Jestine

      Likes(0)Dislikes(0)
  2. Albert van Bemmelen

    April 30, 2022 at 1:57 pm

    Very interesting new training course of which I like to know if there also is a new Jestine e-book on sale that describes these new techniques? Like on what new equipment or best techniques to use to kill or remove short circuits easily and on how to program a NAND EMMC Flash memory IC by using the latest specialized NAND EMMC Flash programmer. And also how to diagnose these problems in less than 10 seconds with the help of the latest specialized test instrument in the market. Like on locating a very small leakage between the DC supply line to ground.

    Likes(0)Dislikes(0)
    • Jestine Yong

      April 30, 2022 at 4:34 pm

      Hi Albert,
      Thanks for the comment. At current moment no plans yet to come out with new ebook.

      Jestine

      Likes(1)Dislikes(0)
  3. Yogesh Panchal

    April 30, 2022 at 3:35 pm

    Congratulations!to new comers having hands on training using HD Microscope.

    Likes(0)Dislikes(0)
    • Jestine Yong

      April 30, 2022 at 4:31 pm

      Hi Yogesh,

      Thanks.

      Jestine

      Likes(0)Dislikes(0)
  4. Waleed Rishmawi

    April 30, 2022 at 4:18 pm

    that is a well needed repair training in our repair fields now a days. it is all about microsoldering now, microscopes, SMD parts..etc. keep up the good works.

    Likes(0)Dislikes(0)
    • Jestine Yong

      April 30, 2022 at 4:30 pm

      Hi Waleed,

      That is so true.

      Thanks.

      Jestine

      Likes(0)Dislikes(0)
  5. Suranga Bandara

    April 30, 2022 at 11:19 pm

    Hi Mr Jestine
    Very important course and excellent new technologies with tools.
    Congratulations !

    Likes(0)Dislikes(0)
    • Jestine Yong

      May 1, 2022 at 7:38 am

      Hi Suranga,

      Thanks!

      Jestine

      Likes(0)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close