Don't Miss


Different Between Glass and Ceramic Fuse

By on February 7, 2011

fuse

If you would like to know what is the different between using a glass fuse and a ceramic fuse in electronic equipment then please click on the photo to find out the answer.

Likes(3)Dislikes(0)

4 Comments

  1. Amir Mukhtar

    February 9, 2011 at 5:51 am

    Sir, thanks you for your guidance about Fuses.
    I have an other question about LCD or MOnitor Circuit diagram and Block diagram. Kindly could it possible, so please provide me Circuit diagram and Block diagram of Both devices (CRT Monitor and LCD). iam very greatfull to you.

    thanks you Sir,
    Amir mukhtar

    Likes(0)Dislikes(0)
  2. admin

    February 10, 2011 at 4:26 am

    HI Amir,

    I suggest that you search from this link that have lots of equipment block diagram:

    http://www.tdk.co.jp/teapl01/index.htm

    Jestine

    Likes(0)Dislikes(0)
  3. Amir Mukhtar

    February 15, 2011 at 5:52 am

    INTERESTING BUT TOOK LESSON FROM FUSE FAULT
    Sir,
    your Fuses Article is too good and inform-able.
    About Fuses i have some experienced in repairing microwave oven fault.
    i have received Samsung Big microwave oven in Dead condition. After Diagonosis, I found that only Fuse is Burned. which having Rating 10 Ampere Thermal Type. In pakistan many technicians dont replace the fuses exept wire soildering. So, I did same and wire solded by idea on power board. After done i checked the microwave and that was fine with operational. therefore, i backed oven to customer and charged minimal amount means diaganostics charges.

    After two days the complaint was again returned and i checked again and found that Fuse was burnt.

    this time i felt what wrong with it and Thinked in deep with Load and fuse nature of work. Need to be thinked one thing that Fuse works on Load Ampere only not voltage. So, therefore i decided to use "10 -Ampere" thermal fuse and get to fix.

    After again done with same rating fuse i checked again. it was fine and returned to customer with sorry. and noted in diary for further move to observation.

    now that time microwave was done fine with satisfaction.
    the lesson is that from above drill is ::
    Dear guys use same type fuses which found burnt in devices.

    regards
    Amir Mukhtar

    Likes(0)Dislikes(0)
  4. admin

    February 15, 2011 at 8:15 am

    Hi Amir,

    Thanks for sharing and i always replace with original fuse and do not want to take risk of the equipment coming back for repair.

    Jestine

    Likes(1)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Free Report