ENZER DVD No Disc Problem Solved
The complaint of this Enzer DVD Player was it can load and eject disc but it cannot play showing the “No Disc” symptom.
As usual, the cover need to be removed in order to repair it.
When I was testing the lens unit I found that there was no laser beam and this could mean the mainboard, ribbon cable or the lens unit have problem.
Note: Do not look at the laser beam with your bear eyes as it can destroy your eyes. You can use a digital camera for this purpose. For more information on how to test a laser diode you can check out the video below:
I continued to check on the player and found the ribbon cable was not in good condition.
I replaced with a new cable and the lens was still not working.
Next I connected an external new pick up lens unit and tested it again. I saw the laser beam coming out. So replacing the lens unit solved the problem. If you would like to have more information about DVD player repair you can check out Humphrey’s ebook here.
This article was prepared for you by Suranga Bandara who owns an Electronics shop in Anuradapura, Sri Lanka.
Please give a support by clicking on the social buttons below. Your feedback on the post is welcome. Please leave it in the comments.
P.S- If you enjoyed reading this, click here to subscribe to my blog (free subscription). That way, you’ll never miss a post. You can also forward this website link to your friends and colleagues-thanks!
Note: You may check out his previous repair article in the below link: