Looking For Multimeter That Have High Frequency Measurement?
The frequency meter is use to check on the value of the frequency in crystal and circuit. Not all digital multimeter have the frequency mesurement. Even if the meter have the frequency range, the measurement range would be usually low about 1Mhz. The highest frequency range that I have came across on ordinary digital multimeter was 24Mhz. Just few weeks ago one of my ERG members emailed me about a digital multimeter that can check on frequency up till 400MHZ! That was very high! I have not use the meter thus I can't endorse it but if you are looking on a digital multimeter that have frequency meter then you can give it a try.
The price is only USD49.95. You may click on the photo to check out the price and the specification. For your information the meter also have a wide range in checking capacitance value.
(1)Dislikes
(2)
5 Comments
Leave a Reply
Shihab kably
October 29, 2012 at 5:43 am
I think that the device can be a substitute for Aloslscop
Giuseppe
October 30, 2012 at 5:56 pm
Hi Jestine, best multimeter for price is Uni-T UT61E, look at the specification, is a very good buy...
Jestine Yong
October 30, 2012 at 8:43 pm
Hi Giuseppe,
Yes it is indeed a good brand. The model you mentioned could only measure up to 10 MHZ but they have some other model that are even powerful but the price range will be higher. Thanks for commenting.
Jestine
Giuseppe
November 6, 2012 at 6:40 pm
Hi Jestine i have one ut61e and measured frequency is not 10Mhz, http://www.uni-trend.com/ut61e.html specification say measure up to 220Mhz, i also have a UT71E but i prefer the ut61e...
Jestine Yong
November 6, 2012 at 9:23 pm
Hi Giuseppe,
Thanks and I guess the one printed on Ebay was wrong spec. Visit the link below and it was stated as 10 MHZ:
http://www.ebay.com/itm/UNI-T-UT-61E-Modern-Digital-Multimeters-UT61E-/260733900740
Jestine