Latest News

• Observe the Filter Capacitor Cap

    Whenever there is a problem in electronic equipment i would first look at the electronic board for dry joints, decayed glue, loose connection in connectors, bulged capacitors, burnt...

  • Posted October 10, 2007
  • 0
• Thanks for your support!

  Not long after i  launched my new E-book, I made lots of sales from it. My first buyer was from Australia and here are just some of the countries...

  • Posted October 8, 2007
  • 0
• At Last My Brand New E-book Is Ready

    It took me a month to finally complete the task of creating an E-book to sell it to  the  electronic repair market. The first book on “How to...

  • Posted October 6, 2007
  • 0
• About Bulged Electrolytic Capacitors

    Whenever you see a bulged electrolytic capacitors on any kind of electronic boards, don’t waste your time to measure or check it. Simply remove the capacitors and replace...

  • Posted October 5, 2007
  • 0
• Contrast Problem In CRT Monitor

    If CRT Monitor have contrast problem, the thing you must do is to adjust from the menu or button. Check the heater voltage make sure it should have about...

  • Posted October 4, 2007
  • 0
• About Transistor Part Number

    Transistor part number can be confusing if you did not know how to read it. If you read the wrong part number you won’t be able find the...

  • Posted October 4, 2007
  • 0
• Automobile Board Repair

    My mechanic sent me an automobile system board for repair. Upon seeing the board, i found that almost all the electrolytic capacitors electrolyte had leaked. Cleaning the board...

  • Posted September 27, 2007
  • 0
• Monitor Color Problem

    Whenever there is a problem about missing color, the first thing i do was to gently tap the Cathode ray tube (CRT) board with a screw driver. Many...

  • Posted September 26, 2007
  • 0