Latest News

• Replacement resistor for Analog multimeter

    If you are using analog multimeter and experienced not accurate result especially using the X1 ohm scale, i suggest that you open the cover up and see if...

  • Posted September 15, 2007
  • 4
• Technology- Cutting Laser

  It can cut through steel, plastic and etc-Enjoy! Likes(0)Dislikes(0)

  • Posted September 14, 2007
  • 0
• Bdent Electronic Supplier

  Here’s another electronic suppliers that offer semiconductor parts for electronic repairer-Bdent dot com. They also have variety range of other electronic components too. Feel free to check out the...

  • Posted September 14, 2007
  • 0
• Update and Upgrade Yourself

  No matter what kind of jobs you are doing right now whether is technician, engineer, designer, programmer and etc you need to constantly update and upgrade yourself in order...

  • Posted September 13, 2007
  • 0
• How To Reprogramming 93c56

  How to reprogramming 93c56 eeprom ic is not difficult. What you need is a eeprom programmer and the master copy of the software. If you knew that this particular...

  • Posted September 13, 2007
  • 1
• Monitor Repair Manual

    At the beginning, you need to depends on monitor repair manual to understand how Monitor circuits work. After you had familiarize how it works, i suggest that you ...

  • Posted September 13, 2007
  • 30
• Shorted Diode Test

  The best to test a diode is to remove one lead from the electronic board. Set your analog meter to X 10 k ohms and place it on the...

  • Posted September 12, 2007
  • 0
• Are resistors with 5 colors more accurate?

  Yes, resistors with 5 color bands are more accurate than the 4 color bands. With four color bands there is no way you can get the resistor value like...

  • Posted September 11, 2007
  • 0