All posts tagged "atx power supply repair"
Two SMPS Saved From Dump
These two SMPS units belonged to the hospital where I work. Complaint was both dead! First I checked the AC Adapter and found that the DC wire had got punctured. Nevertheless, I...
- Posted January 28, 2022
Saved Two More ATX SMPS From Dump
I request you to refer to my previous article of July, 2018 in connection with the above SMPS : 14 Bad Components Found In Intex SMPS Model Smart IT-2045S+ (Unbelievable)...
- Posted August 16, 2021
SMD Resistor Found Burnt And Displaced In Enhance SMPS Model SFX-200D
This was one among the five SMPS brought from my hospital, where I work (now from home only). As the IT-Administrator had already cleaned the inside of this SMPS, it saved my time in doing it. I...
- Posted July 20, 2021
Fixed Cap Found Cracked In SUPERCOMP SEP-500 ATX SMPS
This computer SMPS is one among the five brought from my hospital, where I work (now from home). Cleaning was already done by the staff there and that saved my time....
- Posted July 13, 2021
Burst Capacitor And Dry Solder Found In FOXIN Computer ATX MODEL FPS500S
This is one among the five Computer SMPS brought from the hospital for repair. As the cleaning was already done by the staff there, I straightaway investigated the reasons for its...
- Posted July 9, 2021
Clicking Noise in Computer ATX SMPS
Received ATX SMPS (Circle- Model CPH699-400) for repair with problem it turns off after one clicking noise. Opened the SMPS for inspection on visual testing I found everything is OK there was no physical damage or burning...
- Posted April 15, 2021
Replacement Of Two Bulged Capacitors And Dry Solder Patch Up Brought Life Back To SMPS!
This SMPS was brought to me with the complaint that it was dead. After opening and cleaning up the inside thoroughly, when I did a visual examination, I saw two capacitors were...
- Posted April 1, 2021
Just Patching Up Dry Solder Revived A Dead ZEBRONICS Computer PC SMPS
This SMPS Model No. Zebronics ZEB-N450W was brought to me in dead condition. After opening and cleaning the inside thoroughly using blower and various brushes, the complaint was confirmed to be...
- Posted March 27, 2021