All posts tagged "LED TV Repair"
-
Fixing Universal Board In SHARP LED TV LC24E156M
This is yet another case that I had the chance to attend to during my periodical visits to my techie friend who focused on panel bonding works. The mother board of this...
- Posted March 24, 2023
-
Backlight Issues In HAIER LE39B900 And SHARP LC32M300M Solved
As mentioned by me in my previous articles, I gain more experiences when I visit my friend’s shop, which is focusing more on panel bonding cases. The following two cases are...
- Posted March 11, 2023
-
Four Different Cases Of Backlight Issues
As mentioned by me before in a few articles, these are cases which I attended to in my friends’ shop. I am sharing this with brief description and pictures for those...
- Posted January 20, 2023
-
Sudden Power Surge Blew SMPS In Two HAIER LED TVS MODEL LE22B600
These two LED TVs belonged to the hospital where I work. They were brought with the complaints that both were dead after a sudden power surge due to lightning. Case...
- Posted January 14, 2023
-
Unknown Burst Component Bypassed To Restore Sound In SHARP LED TV MODEL LC-32LE341M
This TV was yet another one that I got the chance to restore at my friend’s place (Panel Bonding Expert). The TV came to his shop with the complaint that there was no sound, but picture was...
- Posted December 17, 2022
-
Easy TV and Monitor Boards Firmware Programming With The RT809H Programmer
This article is about fixing already 2 older universal TV Boards that can be used to turn spare left over LCD screens into good televisions or monitors. LCD screens...
- Posted December 10, 2022
-
Backlight Replacements In Two LED TVS
Since I have frequented my visits to my friend’s shop, I started getting involved in some odd works here and then to help him reduce the load. Here are two...
- Posted December 10, 2022
-
Replaced Motherboard In SONY LED TV Model KDL-40NX650
This TV belonged to a doctor, who had kept it aside for a very long time, as he bought a new one. The reasons was that when the TV was taken...
- Posted December 3, 2022












