Here’s some of the tips by Robin Cheng in using Huntron Tracker as your troubleshooting tool. Hi Jestine , I agree with you THAT POWER ON TEST IS BEST WAY TO JUDGE IF IC IS GOOD OR...

Normally one of the most common problem found in electronic board are bulged capacitors. Electrolytic capacitor bulge problem is very frequent in Computer Motherboard and usually after the replacement the motherboard will work perfectly okay. Do you know...

Have you encounter before whenever you replace a new fluoroscent lamp and “On” it, the new lamp will immediately go bad again. You will be wasting your money and do not know why the new lamp die...

This Philip 170s LCD Monitor was repaired by someone before and the problem was the display appeared for less than a second and then shut down. This usually prompt to a failure in inverter board or bad...

I came across lots of LCD Monitor problems with bulged electrolytic capacitors. The rating of the capacitor temperature usually were 105 celcius. The problem with these capacitor is that they are not from a good quality grade...

If you would like to know more about what is “Vacuum Technology For Home Built Gas Lasers” then please click here to go to the website. Likes(0)Dislikes(0)

If you have the flyback tester then it would be easy for you to test the horizontal driver transformer. The testing method is the same as when you test on the smps transformer. The horizontal driver transformer...

Here is a website that can teach you on how to build your own ESR meter. The designer has listed out all of the components and comes with photos too. If you have the time you can...