Don't Miss
  • Fixing VGA Connector

      A broken VGA connector could cause no display, color out, intermittent problem and etc. Looking at the connector we thought it could be an easy job to replace with a new VGA connector. If you have...

    • Posted July 7, 2008
    • 3
  • Testing SMPS

      If you repair SMPS and wish to test it, make sure the load that you are using is big eough for the SMPS. A small load would not turn “On” the SMPS in fact it would...

    • Posted July 7, 2008
    • 28
  • An Email From ERG Member

    After I sent out the July repair newsletter about “How to effectively analyze any types of electronic equipment and be an expert on that field” i got this email from one of my ERG Member: Thanks for...

    • Posted July 6, 2008
    • 0
  • A Good Explanation About Stress Management

    “A lecturer, when explaining stress management to an audience, raised a glass of water and asked, ‘How heavy is this glass of water?’ Answers called out ranged from four ounces up to twelve. The lecturer replied, ‘The...

    • Posted July 5, 2008
    • 0
  • BGA Rework With Hot Air

    Likes(0)Dislikes(0)

    • Posted July 4, 2008
    • 0
  • Shorted SMPS Transformer

      Few days ago my company received 4 units of HP7500 17″ CRT Monitor for repair. I was told that these four Monitors was from a school. They had about more than 10 over units that have...

    • Posted July 4, 2008
    • 2
  • About Photo

    This morning i received an email about some support questions from my member and the member sent his photo together with his wife and his cute little daughter. I did not request the photo from him but...

    • Posted July 3, 2008
    • 0
  • Continuity Test

    Now you have confirmed that the problem of one horizontal line is in the vertical section. Next you use all your troubleshooting skill and your mighty test equipments to locate the fault in the vertical section. You...

    • Posted July 3, 2008
    • 0
Open

Close