Don't Miss
  • Audio Restoration Repair Project

    Please click on the photo to read the good article posted by Yachad in the website Likes(2)Dislikes(0)

    • Posted July 13, 2011
    • 2
  • Electronicsnmore Electronics Supplier

    Found another electronics supplier from United States. This company carry lots of range of products and please click on the photo to check out the parts that you need. Likes(1)Dislikes(0)

    • Posted July 12, 2011
    • 0
  • Zhenning Already Got His Meters

    Zhenning from Penang Malaysia the top author for the contest already got his meters and he sent the photos of the meters. Likes(0)Dislikes(0)

    • Posted July 9, 2011
    • 0
  • Low Temperature Solder Paste

      Chip Quik came out with another new product which is the "Low Temperature Solder Paste". Please click on the photo for more information. Likes(0)Dislikes(0)

    • Posted July 9, 2011
    • 0
  • Electronics Repair Questions/Answers and Testimonials- Part 82

      Your e-books have been a great help for me ,,,,,Actually I also attended the training institute before  but not much learning ….Your’s have beaten those ……trainings ….. Thanks again…. Karna Nepal ==========================  Hi Jestine.   I...

    • Posted July 6, 2011
    • 3
  • Shipping Out The Meters

    I’m shipping out today the meter prizes for the winners of the contest. I’m using local Airpak express to ship the meters to Zhenning because he is from Malaysia. Another one is to Bougrine from Morocco. Since...

    • Posted July 5, 2011
    • 2
  • Transformerless Switch Mode Power Supply Circuit

    This website was recommended by Beh about "Transformerless Switch Mode Power Supply Circuit".  If this circuit/IC can be further improve then in the future we may not need transformer to get the secondary output voltages. Manufacturers could...

    • Posted July 4, 2011
    • 25
  • Should I Check All Components In The Circuit?

    Got an interesting question from a fellow member  " If I am repairing a circuit board there may be 50 or more components on the board, am I to check each component, until the defective component is...

    • Posted July 2, 2011
    • 7