-
Burnt And Badly Leaked Capacitor Found In Samsung CRT TV
MAKE AND MODEL: SAMSUNG CD20F4 CRT TV COMPLAINT REPORTED: Dead HISTORY: This CRT TV had come to me with a problem of no video a couple of months ago, which I...
- Posted September 16, 2020
-
IC Failure In Philips Radio DL167
MAKE AND MODEL: PHILIPS DL167 AM-FM RADIO COMPLAINT REPORTED: Not picking up any stations. HISTORY: This Radio had visited me once in March, 2018, though I could release an article only...
- Posted September 16, 2020
-
Vibrograf B200 Mechanical Watch Calibrator Repair
This repair is about a Vibrograf B200 mechanical watch calibrator. It plots the mechanical ticks of a watch on a roll of paper by picking up the vibrations with a special sensitive microphone and comparing that with...
- Posted September 12, 2020
-
SMD Regulator IC Found Open In OLSENMARK OMR1239
MAKE AND MODEL: OLSENMARK MODEL OMR 1239 USB RADIO COMPLAINT REPORTED: DEAD TROUBLESHOOTING AND RECTIFICATION DONE: Opened, dismantled and cleaned the set thoroughly. Applied power externally to check upto which...
- Posted September 12, 2020
-
HP Laptop With DISK 0 Error Fixed
Symptom: Received the laptop with Disk “0” Error not booting. First I have checked HDD Detection under BIOS Setting I found HDD is detected under Bios setting. For further diagnosis I...
- Posted September 12, 2020
-
Micro Switch Found Short In Sony Car Stereo
MAKE AND MODEL: Sony Car Stereo Model CDX-GT44U COMPLAINT REPORTED: None of the switches in the front panel work. TROUBLESHOOTING AND RECTIFICATION DONE: Opened, dismantled the CD assembly and cleaned the set thoroughly. The design of this...
- Posted September 8, 2020
-
Shark Upright Vacuum Cleaner Repaired
A customer brought in a Shark upright vacuum cleaner that would not work. They had also noticed that for some time the roller head feature had not worked. So, I...
- Posted September 8, 2020
-
Strange Symptoms On A Welding Machine Repaired
A welding technician brought his machine for repair. I was informed that this machine suddenly went into shut down while the welding technician was working on it. The machine was brought...
- Posted September 8, 2020