Don't Miss
On Screen Display (OSD) Problem
By Jestine Yong on June 2, 2009
Recently i got an email that asked about how to solve intermittent OSD problem in his Television. The OSD intermittently appear and disappear on its own without pressing any remote control button. I told him to check for dry joints at the CPU/EEprom area and also Crystal pin. I told him also that it may be the problem of corrupted data in EEPROM IC. I have suggested that the CPU also could cause such problem.
Few days later he emailed me and thanked me that he had solve the problem and it turned out to be a defective CPU IC. Please take note on this.
Likes
(4)Dislikes
(2)
(4)Dislikes(2)
6 Comments
Leave a Reply
kim hock
June 6, 2009 at 6:32 pm
hi jestine.... Do you provide the service for copy the eprom programing ic sst25vf010? i have few lcd controller board pending for the eprom ic. thank you.
admin
June 8, 2009 at 5:12 pm
Hi Kim Hock,
Sorry i do not provide because i do not have such programmer.
Jestine
DIBYENDU RAY
June 9, 2009 at 5:25 pm
Dear sir
I have read your solution about th OSD problem, i want add something,this problem also may comes from the front panel switches,i faced this type of problem many time & when i replace those switches the problem gone away. thanks
admin
June 10, 2009 at 9:10 am
Hi Dibyendu,
Yes you are right the front panel switch also may cause such problem. If the switch stuck/jammed then it may affect the OSD performance.
Jestine
Keith
March 22, 2011 at 1:08 pm
Dear Jestine,
I want to know which is the tester to buy a DCA55 or TF46 and which is the better of the two. please reply .ASAP.
Thank You.
Keith Savary
admin
March 23, 2011 at 5:54 am
Hi Keith,
May i know which components that you want to test? It seems that DCA55 could test and identify more components.
Jestine