Don't Miss

No Windows Loading On PC Solved

By on August 30, 2014
windows not loading repair

 

 

 

 

 

 

 

 

 

 

Early in the morning a co-worker asked for my presence and when I arrived to his Department (Economy) the complaint was his PC was not loading the Operating System (Windows in this case). When the PC was turned on the last screen shown was the following.

windows not loading

As you can see in the photo above, the HDD and the Optical Unit were recognized by the BIOS. Then I had a hunch:  I should enter to the BIOS and check it on.

 

The PC was restarted and pressing the key Del the BIOS could be accessed. The procedure was the following: Del → Boot → Boot Device Priority → Enter.

windows not loading repair

At this point the first option of the Boot was disabled; this was the reason of the complaint with this PC. Therefore it was needed to configure a boot device then, let’s see in the photo below how it was configured.

windows not loading repairs

First boot device configured was the HDD and as second the Optical Unit. As last option the key F10 was pressed to save current settings and exit and Enter.

windows not loading repaired

When the PC restarted look what happened.

windows not loading repairings

humber

This article was prepared for you by Humberto Rodriguez, one of our ‘Master Authors’ from Cuba.

Please give a support by clicking  on the social buttons below. Your feedback on the post is welcome. Please leave it in the comments.

P.S- Do you know of any your friends who would benefit from this content that you are reading now? If so, forward this website to your friends or you can invite your friends to subscribe to my newsletter for free in this Link.

 

Likes(19)Dislikes(0)

8 Comments

  1. Robert

    August 31, 2014 at 4:43 pm

    Thanks Humberto.

    Likes(0)Dislikes(0)
    • Humberto

      September 1, 2014 at 6:59 pm

      Ok Robert.UR welcome

      Likes(0)Dislikes(0)
  2. Waleed Rishmawi

    September 1, 2014 at 1:01 pm

    question: the windows was working fine before? then how it was disabled? it is human error or the machine did that?

    Likes(0)Dislikes(0)
    • Humberto

      September 1, 2014 at 7:04 pm

      Hi Waleed, this error was caused for the machine, it's an old model. I recognize it was first time I saw this. Have a good day

      Likes(0)Dislikes(0)
      • Venu gopal

        September 2, 2014 at 10:51 pm

        if the bios settings gets automatically changed to default values,i would suggest to-
        1) replace the bios battery in the mobo.
        2)reseat the cables

        Likes(0)Dislikes(0)
  3. Venu gopal

    September 2, 2014 at 10:23 pm

    lots of people still use win Xp !

    Likes(0)Dislikes(0)
    • Humberto

      September 5, 2014 at 8:50 pm

      UR right, it's an old model PC, and do not accept higher Operating Systems.

      Likes(0)Dislikes(0)
  4. Anwar Shiekh

    May 16, 2015 at 10:18 pm

    I'm a self confessed firmware fiend, and would have upgraded the BIOS, and am surprised that the OS could not be upgraded; I have moved XP machines to Windows 7 (Windows 8 can be harder).

    Likes(0)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close