Don't Miss

A Dead Cement Vibrator Machine Brought Back to Life

By on October 23, 2021
cement vibration machine repair

 

 

 

 

 

 

A hardware store manager called me about a man who came to their shop to get a cement vibrator fixed but they do not do any kind of repair so they gave me a call about it.

how to fix cement vibrator machine

The man showed up to my shop carrying an open vibrator

 

which what you see in the photo and the control board was separate in another bag (top plate not included).

how to repair cement vibrator machine

That is the control board and I could see a switch (high/low) already soldered off board. 

how to fix and repair cement vibrator machine

I checked every component on this board and find everything to be in good working conditions. Since everything checked fine on that board and the switch was already soldered off I am assuming that the switch was bad and needed replacement.

So I decided to replace that switch, install it back on board and see if it works or not and we go from there.

broken parts in cement vibration

I did a quick check on that switch and found to be faulty because there was no continuity when checked with the multi meter and there was no clicking sound to it as it supposes to be.

how to fix a broken vibrator machine

I found a used switch in my shop but before I install it back on board, I opened it up and gave a clean to make sure it is functional and soldered it back on board.

servicing a cement vibrator machine

I put the board back in its housing screwed it tight and then gave it a try. The device was vibrating softly because the top plate was given to me to test but that was a sign that the vibrator was up and running.



Summary: the shop gets the device, soldered the switch off but does not complete the repair so it was brought to me and I have exactly the same switch then when installed the machine worked perfectly.

Mission Accomplished.

waleed

This article was prepared for you by Waleed Rishmawi, one of our ‘Master Authors’ and currently working in the Bethlehem area of Palestine repairing electrical and electronic equipment.

P.S- Do you know of any your friends who would benefit from this content that you are reading now? If so, forward this website to your friends or you can invite your friends to subscribe to my newsletter for free in this Link.

Note: You can check his previous article on Turkish Welding Machine Repaired

 

Likes(52)Dislikes(0)

7 Comments

  1. Parasuraman S

    October 23, 2021 at 1:24 pm

    Yes, mission accomplished vibrantly!

    Likes(0)Dislikes(0)
    • Waleed Rishmawi

      October 23, 2021 at 4:35 pm

      Parasuraman: thanks man, and be blessed today

      Likes(0)Dislikes(0)
  2. Yogesh Panchal

    October 23, 2021 at 2:04 pm

    Good Quick fix!Waleed

    Likes(0)Dislikes(0)
    • Waleed Rishmawi

      October 23, 2021 at 4:37 pm

      Yogesh: yes, replacement available make it easy to get things done. have a blessed day

      Likes(0)Dislikes(0)
  3. Albert van Bemmelen

    October 23, 2021 at 3:12 pm

    Having a shop with matching identical replacement parts in stock enables you to successfully fix almost any problem, and in no time too!

    Likes(0)Dislikes(0)
    • Waleed Rishmawi

      October 23, 2021 at 4:38 pm

      Albert: indeed. without parts available in the shop would make it hard to get things done and if I order them online, it would take a long time to get things done. have a blessed day

      Likes(0)Dislikes(0)
  4. Humberto

    November 2, 2021 at 9:54 pm

    Thanks for sharing your expertises

    Likes(0)Dislikes(0)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Open

Close