All posts by Jestine Yong

• 
  A Laptop Powering On But With No Backlight Repaired

                A university student who needed this laptop urgently brought it to my shop for repair and the main problem was no back light on the screen. A very simple way...

  • Posted February 17, 2022
  • 14
• 
  Hair Dryer Repaired

  My daughter’s friend has sent this Hair dryer for repair stating problem this machine makes humming noise and Fan also not rotating. On primary Inspection I found exact same problem as stated. Hence I opened the fan...

  • Posted February 17, 2022
  • 15
• 
  Samsung Computer Monitor Saved From Water Seepage

            This computer monitor suffered inadvertent water seepage and was brought to me for recovery. As the monitor was kept aside without using for a few days, before it was brought to me...

  • Posted February 17, 2022
  • 15
• 
  Von HotPoint Microwave Oven Came In With “No Heating” Problem Now Repaired

  I received this microwave in my shop from a client who wanted to see if it will ever work again, according to her she had given up on it and it has stayed in her house for...

  • Posted February 12, 2022
  • 16
• 
  Domestic Voltage Stabilizer’s Transformer Humming Normalised

                This D V S was on my  bench work with complaint of  loud humming and output voltage showing letter H.  I opened the case and did visual checking. I did...

  • Posted February 12, 2022
  • 10
• 
  Saved Another Computer SMPS From Dump

              This iBall Computer SMPS model LPS223-400 belonged to the hospital where I work. It was brought to me dead. As my IT colleague had already opened the unit and cleaned it...

  • Posted February 12, 2022
  • 15
• 
  A Welding Machine Shutting Down Due To A Broken Fan Repaired

  A lot of welding technicians ignore the benefit of having a fan or two inside a welding machine. I am hearing this statement from technicians that as long the machine is up and running it does not...

  • Posted February 12, 2022
  • 6
• 
  Completed The Basic and Advanced Repair Course

  Completed today the Basic and Advanced (Level 1 and 2) Repair course (6 days) for 6 participants from one of the factories that do PCB repair work in Penang. After the completions of the course, I treated...

  • Posted February 12, 2022
  • 8