Don't Miss

All posts by Jestine Yong

  • Going To Bangkok Thailand

    Last year November my family and I went to Taiwan for holiday and this year we will be heading to Bangkok Thailand. We will be leaving tomorrow morning and only be back on Saturday midnight. I will...

    • Posted December 4, 2012
    • 4
  • Electronics Repair Questions/Answers & Testimonials- Part 39

      Hi Jestine! I have already launch my electronics workshop in my home town starting to work on lcd tv, lcd mornitors and so forth! currently i saw an  advert onthe magazine about the short course on...

    • Posted December 3, 2012
    • 8
  • Completed The Advanced Electronics Repair Course

    Just completed the Advanced Electronics Repair Course for 8 participants. Here are the photos taken during the 3 days course Likes(1)Dislikes(0)

    • Posted November 29, 2012
    • 0
  • Atlas DCA Pro By Peak Electronics

    Atlas DCA Pro is the latest test equipment by Peak Electronics UK. This company is famous for manufacturing good tester for the engineers and technicians. I personally have bought a Atlas DCA 55 from them many years...

    • Posted November 29, 2012
    • 0
  • Burnt Mark On Circuit Board

    There will always be a decision whether to scrap off the burnt mark or just let it remain at that way. Please see the photo. It all depends on the problem. If the problem is intermittent then...

    • Posted November 27, 2012
    • 3
  • Diode Test Range In Digital Multimeter

    I'm not sure about you but when testing diode I do not use the diode test range found in digital multimeter. I knew many repairers are using this diode test range to test on diodes. For your...

    • Posted November 27, 2012
    • 41
  • Inductance Meter To Check Coils

    For small coils I do not use inductance meter instead I just use an analog meter to check for continuity. For small coils I could say it  hardly have shorted turns because it consists of less winding...

    • Posted November 26, 2012
    • 0
  • Completed Another Repair Course

    Just completed today the Basic Electronics Repair Course for 3 participants. By right another 2 suppose to come from oversea but they could not make it. Next week will start the Advanced Electronics Repair course . Here...

    • Posted November 24, 2012
    • 2
Open

Close