All posts by Jestine Yong
-
A Welding Machine With Damaged Output Terminals Replaced
A welding technician brought these two welding machines for repair. Both had the same issue; damaged output terminals and needed replacement. As seen in the photo one side was damaged really badly so I suggested to the...
- Posted July 27, 2024
-
Sandwich Toaster Repaired
In rainy season I asked my wife to make some toast sandwich with Ginger tea. She took out the toaster prepared the recipe but toaster was not turning ON. She...
- Posted July 27, 2024
-
DELL VOSTRO Laptop Repair
Received Dell laptop for RTC ERROR, customer stating that every time when he starts the laptop it gives RTC Error & every time on booting it shows system date...
- Posted July 20, 2024
-
Power Supply Strengthening
I recently got a second hand EVGA 500-W1 power supply to replace a power supply I did not trust only to discover that the EVGA 500-W1 has a design flaw as...
- Posted July 20, 2024
-
Realistic Cassette Recorder Repair
I bought this vintage Realistic tape recorder two weeks ago. When I put a cassette tape in to test the player it would play but the fast forward or rewind would not work. The volume control was...
- Posted July 20, 2024
-
Saving Computer SMPS Part – 9
These two Computer SMPS belonged to the hospital where I work and was brought to me in dead condition. Preliminary cleaning was already done by the IT Administrator saving that work for me. Case (1) Zebronics-ZEB-N450W :...
- Posted July 20, 2024
-
A Bluetooth Speaker With No Power Repaired. Model: Harman/Kardon 3
The device was brought to by a regular customer from USA and a good friend of mine. He said this speaker does not power on. I checked about this issue...
- Posted July 20, 2024
-
Completed Another Advanced Electronics Repair Level 2 Course
Completed yesterday the Advanced Electronics Repair Course for 4 participants. One of the participants already took the Basic Electronics Level 1 course 13 years ago! Below are the photos taken during the 3 days course: Likes(18)Dislikes(0)
- Posted July 20, 2024












