All posts by Jestine Yong
-
No Display Problem Solved By Cutting Tracks To Panel In DIANORA LED TV Model DN3201V
This TV belonged to my colleague in the hospital and was brought to me with the complaint that the display went off, while sound was heard, when watching the TV. I applied...
- Posted May 4, 2024
-
USB C TO A Connector
Have a 4-port unpowered USB hub that was connected to the computer with a USB A to A cable and did fine service. However, I recently ordered a new iMac at work which has only USB C...
- Posted May 4, 2024
-
A Welding Machine With Warning Light Repaired And Maintained
One of my regular customers brought this welding machine with warning light on for repair. He said the machine powers on fine but it does not weld which is one of the most common welding machine faults....
- Posted May 4, 2024
-
Portable Bluetooth Radio Battery Problem
Problem symptom: Radio Battery turned off within 10 minutes after full battery charging. So for reconfirming the problem I kept it for Battery charging it took 4 hours to fully charge the...
- Posted May 4, 2024
-
Ramtons Microwave Oven Model RM206 “No Heating Problem” Now Repaired
I received this microwave in my shop with “no heating symptoms”. This problem is usually caused by failure of one or more components on the high voltage circuit. See the components labelled below. If any of the...
- Posted April 27, 2024
-
12V 3 Amp Power Adapter After About 5 Years Fixed Again
Although this repair is about a in year 2018 already before repaired power adapter it is not a bad power adapter at all! That is mainly because I use this 12V...
- Posted April 27, 2024
-
No Radio Pick Up Solved In PHILIPS 2-In-1 Model 15DR437/00
This was brought to me with the complaint that there was no radio pick-up. The cassette side was not being used and need not be rectified was the instruction from him. When...
- Posted April 27, 2024
-
An Easy Fix To A Dead HP Computer Monitor
A customer called me about a dead HP computer monitor. For some reason, this computer monitor was dropped off while it was on and when it hit the ground, the monitor went...
- Posted April 27, 2024












