Don't Miss

All posts by Jestine Yong

  • It Was A Very Good Trip

    The Cameron Highlands trip was good and we have enjoyed every moment there. The last time i went there was two and a half years ago. The temperature at the hill there was about 18 to 20...

    • Posted August 24, 2008
    • 0
  • Going To Cameron Highlands

      Tomorrow morning my family will be going to Cameron Highlands for holidays. We will be going with my friend’s family. This friend of mine and his family were the one that joined me and my family...

    • Posted August 20, 2008
    • 0
  • Electronic Repair Questions/Answers And Testimonials Part 10

    Hi Jestine, I have 2 LCD TV’s and all the PSU O/P voltages are present 24v, 12v, 5v, 5v standby, none of them are fluctuating up and down. All seems ok with the PSU except that both...

    • Posted August 20, 2008
    • 14
  • Understanding The Operation Of A CRT Monitor

    If you are a beginner and wish to learn how A CRT Monitor work then please click on the picture for more information   Likes(0)Dislikes(1)

    • Posted August 19, 2008
    • 1
  • High Pitched Whistling Noise Coming From Power Supply

    If the power supply (SMPS) that is running fine and you could hear a high pitched whistling noise then suspect the switch mode power transformer (power transformer) or the secondary side filter coil (inductor) have problem. The...

    • Posted August 19, 2008
    • 0
  • One Vertical Or Horizontal Line Across LCD Monitor Screen

      If you come across any LCD Monitor that have a permanent one vertical or one horizontal line across the LCD screen then most probably you need to replace the LCD Panel as both the problems can’t...

    • Posted August 19, 2008
    • 14
  • GlobalTronics 2008

      I got an invitation to attend the Globaltronics 2008 exhibition in this coming 9 to 12th of September at Suntec Singapore. I could not make it on that day. Here are just come of the products...

    • Posted August 18, 2008
    • 0
  • Backlight Replacement

    If you repair LCD Monitor and confirmed that the backlight (lamp) was the caused of the problem then your next steps would be either replace the bad backlight with a new lamp or salvage from a used...

    • Posted August 18, 2008
    • 3
Open

Close