Electronics Repair FAQ 18
By Jestine Yong on December 13, 2011
Please click on THIS link to read Electronics Repair FAQ 18.
Likes
(0)Dislikes
(0)
(0)Dislikes
(0)
2 Comments
Leave a Reply
Cancel reply
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Latest News
-
No Display Problem Solved In TCL Android LED TV Model 32S5202
This TV was brought by a new customer as per...
- Posted April 11, 2026
- 13
-
Solved Weak Output In PANASONIC TWO-IN-ONE Model RX-M70
This was brought by a recently added customer with the...
- Posted April 11, 2026
- 10
-
Completed Another Basic Electronics Level 1 Course
Completed today another Basic Electronics Repair level 1 course for...
- Posted April 10, 2026
- 8
-
The Risks Of No Display Complaints In TVS – XIAOMI L43M6-ES & PHILIPS 43PUT6002/56
I am writing this article only to make the readers...
- Posted April 4, 2026
- 12
-
Solved Not Taking Load Problem In Computer ATX Power Supply Model FOXIN FPS-500T
This SMPS was brought to me with the complaint that...
- Posted April 4, 2026
- 9
-
No Display In Samsung QLED TV Model QA49Q60RAKXXL Gave A Surprise
This TV belonged to my school classmate to whom I...
- Posted March 28, 2026
- 14
-
Dull Display Problem Solved In AMIGO Patient Monitor Model MM1121
This monitor was brought to me with the complaint of...
- Posted March 28, 2026
- 10





Mark Peacock
December 16, 2011 at 11:27 pm
Hi Jestine,
I have run across a part that I have never seen before and need your help in how to test to see if it is a good part. It is called a Fairchild Power Switch. It has six legs and attaches like a Mosfet to a heatsink in an LCD Monitor Power/Inverter Supply.
I am enclosing a link to the Data Sheet for this part.
http://www.alldatasheet.com/datasheet-pdf/pdf/85398/FAIRCHILD/FSDM0565R.html
I have checked my copy of Testing Electronic Components, but this part was not included.
Thanks for your help.
admin
December 17, 2011 at 1:54 am
Hi Mark,
It is a power ic and the only way to troubleshoot it is to check if there is supply going to the vcc pin. If the supply is good and the surrounding/corresponding found to be good then direct replace and retest the set. It is quite common that this ic have problem. With this IC being use, the power supply have less components.
Jestine