All posts by Jestine Yong
-
Facial Sauna Steamer Repaired
Symptom: Unit turning ON but water is not getting Hot. Note: This type of heater elements are always on Live AC Current when it Switched “ON”. Never try...
- Posted August 19, 2020
-
Blown Varistor But Mosfets Were Good
A welding technician brought this tiny welding machine for repair. The cause for this dead welding machine was due to the fact it was powered by a power generator....
- Posted August 15, 2020
-
Bridge Rectifier Found Open In IBall Computer SMPS
MODEL AND MAKE: iBall ATX Switching Power Supply Model LPE223-400 COMPLAINT REPORTED: Dead TROUBLE SHOOTING AND RECTIFICATION DONE: Opened and cleaned the SMPS, which had collected a lot of dust, as expected. Found the fuse, which was...
- Posted August 15, 2020
-
Leaky Capacitor Caused Onida CRT TV To Become Dead
MAKE AND MODEL: ONIDA CO21SJG350BR CRT TV COMPLAINT REPORTED: Dead TROUBLESHOOTING AND RECTIFICATION DONE: Opened and cleaned the set thoroughly. Discharged the anode, disconnected the yoke, CRT Earth Wire, Speakers and Degaussing...
- Posted August 15, 2020
-
Seagate GoFlex External USB HDD Intermittent Working Solved
As per customer stated the problem that HDD works when he bend the cable from HDD connector side. I have start diagnosis. I have connected the unit to my computer...
- Posted August 15, 2020
-
Repaired Digital Multimeter Display Screen Turning To A Dark Patch
I am having an old digital Multimeter which has not been used since last 18 years. Because it was little bulky to carry on field work and consuming more...
- Posted August 12, 2020
-
Mains Cord Was The Culprit In This Philip Radio
MAKE AND MODEL: Philips RL118/00 FM-AM Radio – Thrishul COMPLAINT REPORTED: Dead TROUBLESHOOTING AND RECTIFICATION DONE: Opened and cleaned the set thoroughly. Found the mains cord was the culprit. The...
- Posted August 12, 2020
-
A Dead Treadmill Was Brought Back To Life. Model York
A close friend of mine called me about a treadmill repair and asked if he can come to the shop right away. When the customer arrived, he was carrying the...
- Posted August 12, 2020












